 |
Shell Aviation offers a range of aviation greases designed to fill almost every lubrication need of the aviation community. |
|
AeroShell Grease 5
Mineral Grease for Aircraft
Wheel bearing and engine accessory grease
Microgel thickened, mineral oil base
Meets MIL-G-3545C |
P/N 08-05455
$9.90
|
|
| Combines high load-carrying ability with excellent resistance to water and high temperatures. It inhibited against corrosion and oxidation, and has a useful temperature range of -23°C to + 177°C. Used primarily in aircraft wheel bearings and engine accessories operating at high speeds and relatively high temperatures. |
| |
|
AeroShell Grease 6
General Purpose Airframe Grease
Microgel thickened, mineral oil base
Approved MIL-PRF-24139A |
P/N 08-05460
$9.50
|
|
Inhibited against corrosion and oxidation, it features outstanding low temperature torque properties and resistance to water. Useful temperature range of -40°C to +121°C. Used primarily in plain and anti-friction bearings on general aviation aircraft. |
| |
|
AeroShell Grease 7
Synthetic Grease for Aircraft
Advanced multipurpose airframe grease
Microgel thickened, synthetic diester oil base
Approved MIL-PRF-23827C |
P/N 08-05475
$11.75
|
|
| Corrosion inhibited and fortified to resist oxidation, it combines excellent load-carrying capacity with a useful temperature range of -73°C to + 149°C. Recommended for highly loaded gears and actuator screw mechanisms, as well as for instrument and general airframe lubrication. |
| |
|
AeroShell Grease 14
Mineral Grease for Helicopters
Leading multipurpose helicopter grease
Calcium soap thickened, mineral oil base
Meets MIL-G-25537C |
P/N 08-05480
$8.50
|
|
| Inhibited against corrosion and oxidation, it is compounded with special anti-rust additives, and gives outstanding protection against fretting and moisture corrosion. Useful temperature range is -54°C to +93°C. Approved by all leading helicopter manufacturers. Recommended for most helicopter main and tail rotor bearings; widely used as a general purpose helicopter grease. |
| |
|
AeroShell Grease 22
Synthetic Grease for Aircraft
Versatile multipurpose grease
Microgel thickened, synthetic hydrocarbon oil base
Approved MIL-PRF-81322G |
P/N 08-05490
$16.00
|
|
| Corrosion inhibited and fortified against oxidation, it has excellent anti-wear properties, load-carrying capacity and water resistance, plus a wide useful temperature range of -65°C to +240°C. Recommended for aircraft wheel bearings, engine accessories and airframe lubrication, and for anti-friction bearings operating at high speeds and at high or low temperatures. |
| |
|
AeroShell Grease 33
Synthetic Lithium Complex Grease for Aircraft
Universal airframe grease
Lithium complex thickened,
synthetic hydrocarbon/ester oil base
Approved MIL-PRF-23827C Type 1 |
P/N 08-00825
$19.65
|
|
| Developed with the purpose of satisfying almost all airframe lubrication requirements with a single grease. Its enhanced corrosion resistance and load-carrying capacity reduces wear and tear and can lead to extension of re-greasing intervals and reduction in maintenance costs. Replacing several greases with a single grease avoids the risk of misapplication and also reduces stock inventory, again providing cost savings. Useful temperature range is -73°C to +121°C. |
| |
|
AeroShell Grease 33MS
Synthetic Grease for Aircraft Containing Molybdenum Disulfide
An extreme pressure (EP) grease
Meets MIL-G-21164D |
P/N 08-00824
$15.40
|
|
| AeroShell Grease 33MS is an extreme pressure (EP) grease based on the proven lithium complex technology of AeroShell Grease 33, and is fortified with 5% Molybdenum Disulphide. The benefits of Grease 33MS include: Improved anti-wear and corrosion resistance over AeroShell Grease 17; It is fully compatible with AeroShell Grease 33, so reduces the risks and problems associated with misapplication; Load carrying and EP properties equal to that of the well established AeroShell Grease 17; Fully approved to MIL-G-21164D. It possesses enhanced anti-wear and anti-corrosion properties and is particularly suitable for lubricating heavily loaded sliding steel surfaces, such as, for example, bogie pivot pins on aircraft landing gear-assemblies. AeroShell Grease 33MS is a direct alternative to AeroShell Grease 17, but when changing from (clay-based) ASG 17 to (Li-complex based) ASG 33MS, the normal rules on grease changing should be applied. |