Nutserts

The A-T Series Insert is unique in that it can be installed into most any material above .030/,76 mm in thickness. As the A-T Series is installed, the threaded portion is completely swaged 360° into the sleeve portion and the hole. This permits the A-T Series to be used with Grade 8/metric 12.9 mating screws. The A-T Series Insert is installed using lightweight, hand held pneumatic tools that can be located at any position in your product's assembly sequence. The A-T Series Insert can be installed either prior to or after finish. 360°SWAGING HOW IT WORKS FOR YOU As the A-T Series Insert is installed, the threaded nut portion is drawn into the upper sleeve portion.As this occurs, a 360° swaging action takes place anchoring the A-T Series in the parent material. NUTSERT HOLE SIZE / MATERIAL THICKNESS CHART Installation hole size for the A-T Series Insert is determined by the parent material's thickness and density. The thicker the material the larger the hole required to allow full 360° installation swaging. The application should be tested before hole size is specified Thread Size .030-.090 Mat. Thickness .091-.124 Mat. Thickness .125-.186 Mat. Thickness .187-Over Mat. Thickness Drill Size Decimal Drill Size Decimal Drill Size Decimal Drill Size Decimal 4-40 UNC 3/16 .1875 #10 .1935 #10 .1935 #9 .1960 6-32 UNC 7/32 .2188 #2 .2210 #1 .2280 #1 .2280 8-32 UNC 1/4 .2500 "F" .2570 17/64 .2656 17/64 .2656 10-24 UNC 9/32 .2812 "L" .2900 "L" .2900 19/64 .2969 10-32 UNF 9/32 .2812 "L" .2900 "L" .2900 19/64 .2969 1/4-20 UNC 3/8 .3750 3/8 .3750 "W" .3860 25/64 .3906 1/4-28 UNF 3/8 .3750 3/8 .3750 "W" .3860 25/64 .3906 5/16-18 UNC 1/2 .5000 1/2 .5000 33/64 .5156 33/64 .5156 5/16-24 UNC 1/2 .5000 1/2 .5000 33/64 .5156 33/64 .5156 3/8-16 UNC 9/16 .5625 9/16 .5625 37/64 .5781 37/64 .5781 1/2-13 UNC 3/4 .7500 49/64 .7656 25/32 .7810 51/64 .7970 Thread Size Thread Call Out HD ±.005 L ±.015 D Max. IL Max. LB ±.015 ILB Max. IATD** Max. Hole Depth Min. Part No. Price 4-40 UNC 440 .211 .370 .1875 .205 .660 .495 .395 .400 $0.29 6-32 UNC 632 .240 .370 .2185 .205 .675 .505 .410 .400 $0.27 8-32 UNC 832 .269 .370 .2495 .205 .675 .505 .410 .400 $0.26 10-24 UNC 1024 .306 .370 .2805 .205 .685 .520 .385 .400 $0.38 10-32 UNF 1032 .306 .370 .2805 .205 .685 .520 .385 .400 $0.24 1/4-20 UNC 420 .400 .515 .3745 .275 1.005 .760 .615 .540 $0.38 1/4-28 UNF 420 .400 .515 .3745 .275 1.005 .760 .615 .540 $0.52 5/16-18 UNC 518 .528 .615 .4995 .325 1.065 .770 .630 .640 $1.05 5/16-24 UNC 518 .528 .615 .4995 .325 1.065 .770 .630 .640 $1.76 3/8-16 UNC 616 .588 .745 .5615 .390 1.450 1.095 .890 .770 $1.15 1/2-13 UNC 813 .800 .935 .7485 .485 NA NA NA .960 $4.20 **Dimensions in minimum grip condition. Additional UNF thread sizes available