The Rivnut is a one-piece
internally threaded and counterbored tubular aluminum rivet that
can be pulled up or headed while working entirely from one side,
forming a bulge or head on the blind side. This upset is large
enough to resist being pulled through metal or plastic even under
conditions of eccentric load. It overcomes the difficulty of
installing brackets, handles or other attachments to tubular
pieces.
FLAT HEAD
Part Number
Keyed/
Keyless
Grip
Range
Length
Thread
Price
Each
Buy
NAS1329A06-75
Keyed
.010-.075
.438
6-32
$0.17 ($0.19CAN)
A6-75
Keyless
.010-.075
.438
6-32
$0.17 ($0.19CAN)
NAS1329A06-120
Keyless
.075-.120
.500
6-32
$0.23 ($0.25CAN)
NAS1329A08-75
Keyless
.010-.075
.438
8-32
$0.22 ($0.24CAN)
NAS1329A08-120
Keyless
.075-.120
.500
8-32
$0.18 ($0.20CAN)
NAS1329A3K80
Keyed
.010-.075
.438
10-32
$0.23 ($0.25CAN)
NAS1329A3-80
Keyless
.010-.075
.438
10-32
$0.26 ($0.28CAN)
AEA10K140
Keyed
.075-.140
.500
10-32
$0.49 ($0.53CAN)
AEA10-140
Keyless
.075-.140
.500
10-32
$0.39 ($0.43CAN)
COUNTERSUNK HEAD
Part Number
Keyed/ Keyless
Grip Range
Length
Thread
Price Each
Buy
A6K-106
Keyed
.065-.106
.500
6-32
$0.25 ($0.27CAN)
A6-106
Keyless
.065-.106
.500
6-32
$0.29 ($0.32CAN)
A8K-106
Keyed
.065-.106
.500
8-32
$0.27 ($0.29CAN)
A8-106
Keyless
.065-.106
.500
8-32
$0.22 ($0.24CAN)
20% Discount for 100
per size
RIVNUT INSTALLATION
See TOOLS section for
Rivnut tools.
Rivnut is threaded
onto pull-up stud of a hand or power- heading tool. Rivnut on
header tool mandrel, inserted in drilled hole ready for installation.
Arrow indicates direction of mandrel movement as tool is operated
Mandrel retracts pullingthreaded portion of Rivnut shank toward
blind side of work, forming bulge around unthreaded shank area.
Rivnut is clinched securely in place. Unthreading the tool mandrel
leaves internal Rivnut threads intact, unharmed
BLIND NUT PLATE
Installed Rivnuts
also serve as blind nut plates for simple screw attachments
RIVET/RIVNUT BACK MARKERS
Used to locate
pre-drilled holes in the wing ribs, fuel tank covers, panels,
skin. Pre-drill the ribs, screw in the back markers, lay the
skin sheet over the top, tap with hammer, turn the sheet over,
and drill the holes. This is especially useful for rivnut installation.Due
to the large size of the hole required, small errors in location
can lead to the "Oh darn, I missed the rib syndrome".
Backmarkers save you hours of frustration. 2 sizes of threaded
backmarkers are available. We recommend using the 04-00131 for
wing ribs. Drilling the wing ribs with a 3/32" drill. Drop
in the back markers.
Mark the skin by taping with
a soft hammer. Turn the skin over and drill the skin with a 3/32"
drill. Cleco the skin into position enlarge the holes with #30
drill & cleco. Now you are ready to rivet.
Nut
Plate
Marker
Size
Drill
Size
Part
No.
Price
Buy
10-32*
--
--
04-00117
$0.98 ($1.07CAN)
8-32*
--
--
04-00119
$0.98 ($1.07CAN)
3/8-24
.327
5/8"
04-00121
$1.13 ($1.23CAN)
5/16-24
.265
1/2"
04-00122
$1.13 ($1.23CAN)
1/4-28
.209
1/2
04-00123
$1.14 ($1.24CAN)
10-32
.154
3/8"
04-00124
$0.98 ($1.07CAN)
8-32
.128
3/8"
04-00127
$0.98 ($1.07CAN)
6-32
.102
3/8"
04-00129
$0.98 ($1.07CAN)
3/32"
hole
.093
3/8"
04-00131
$0.98 ($1.07CAN)
*THESE BACKMARKERS ARE
RIBBED (THREADED). OTHERS ARE PLAIN.
Hardware - Rivnuts
