|
|
 |
P (panel thickness) .062
F (frame thickness + .062
GRIP (total thickness) = .124
|
| Total material thickness "G"
consists of the thickness of all materials to be fastened. This
must include the thickness of the material "P" to which
the stud assembly is attached, the material "F" to
which the receptacle is attached plus gaskets (if used) and allowance
for paint or other protective finishes. If the total thickness
is near the upper limit of the stud grip range, the next longer
stud should be used. This will still maintain positive locking
of the fastener under vibration. |
STUD SELECTION TABLE
|
| Using 212-12 Receptacle |
| Total Grip
Thickness |
Use 2600 |
Use 2700 |
| .020 - .059 |
2600-1 |
2700-1 |
| .060 - .089 |
2600-2 |
2700-2 |
| .090 - .119 |
2600-3 |
2700-3 |
| .120 - .149 |
2600-4 |
2700-4 |
| .150 - .179 |
2600-5 |
2700-5 |
| .180 - .209 |
2600-6 |
2700-6 |
| .210 - .239 |
2600-7 |
2700-7 |
| .240 - .269 |
2600-8 |
2700-8 |
| .270 - .299 |
2600-9 |
2700-9 |
| .300 - .329 |
2600-10 |
2700-10 |
| .330 - .359 |
2600-11 |
2700-11 |
| .360 - .389 |
2600-12 |
2700-12 |
| .390 - .419 |
2600-13 |
2700-13 |
| .420 - .449 |
2600-14 |
2700-14 |
4002 SERIES (Large Head) STUD SELECTION
|
| To select the proper length
stud, first select the grommet, for example 4002-G. Next, select
the receptacle, such as 214-16. After determining the total grip
thickness, use the grommet column under which the selected grommet
and receptacle appear. Use the dash number which appears opposite
the determined total grip thickness. |
| Example:
If the total determined grip
thickness "G" was .144, the stud dash number for the
above 4002-G grommet and 214-16 receptacle would be -4. The stud
part number would be 4002-4. |
| Total Grip Thickness Range "G" |
4002-G Grommet & 214-16 Receptacle |
4002-N, 4002-0 Grommet & 214-16 Receptacle |
| .021 - .050 |
--* |
-1 |
| .055 - .080 |
--* |
-2 |
| .081 - .110 |
-2* |
-3 |
| .111 - .140 |
-3 |
-4 |
| .141 - .170 |
-4 |
-5 |
| .171 - .200 |
-5 |
-6 |
| .201 - .230 |
-6 |
-7 |
| .231 - .260 |
-7 |
-8 |
| .261 - .290 |
-8 |
-9 |
| .291 - .320 |
-9 |
-10 |
| .321 - .350 |
-10 |
-11 |
| .351 - .380 |
-11 |
-12 |
| .381 - .410 |
-12 |
-13 |
| .411 - .440 |
-13 |
-14 |
| .441 - .470 |
-14 |
-15 |
| .471 - .500 |
-15 |
-16 |
| .501 - .530 |
-16 |
-17 |
| .531 - .560 |
-17 |
- |
| *4002-G grommet requires
.090" minimum grip. |
|
Hardware - Fasteners - Selection Tables
