Very Obvious & Extremely Durable Remove Before Flight Items
Fitted with vividly-colored Plane Sights Pitot Covers, Safety Streamers and
Aircraft Markers, vulnerable parts of your aircraft are protected and made
clearly visible under all weather conditions, day or night. This helps to
avoid overlooking REMOVE BEFORE FLIGHT items, and makes "ramp rash" damage
much less likely. Every Plane Sights item is guaranteed not to wear out or
fade in the sun for at least two years.
Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. And when cold weather prevents you from installing your pinch-and-insert style blade pitot cover, ice and snow can contaminate your pitot system. Some blade pitot covers also cause damage to paint when the sleve is being forced on and off. The highly conspicuous and very durable Plane Sights Blade Pitot Cover is a perfect fit for any aircraft with a blade-type pitot tube. Properly installed, it’s guaranteed not to blow off, fade in the sun or wear out for at least two years. Fits Piper, Katana, some Rockwell, late Grumman, Lake 250, and all other aircraft with a blade-type pitot tube.
(As seen on the 2008 AOPA “Get Your Glass” sweepstakes aircraft)
Weight: 0.15 kg
Fits Piper, Katana, some Rockwell, late Grumman, Lake 250, and most other aircraft with a blade type of pitot tube. Guaranteed not to wear out or fade in the sun for two years.
This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Large sewn-on Velcro tabs keep it securely in place under all conditions.
(As seen on the 2009 AOPA 'Let's Go Flying' Cirrus SR22)
Weight: 0.14 kg
The length of the tube must not exceed 6.75” and the diameter must not exceed 7/8”. If it does, our Universal Pitot tube cover would be a better choice. The covers fit all Beechcraft, Cirrus, Diamond, and Grumman Mooney aircraft, most Cessnas and Pipers, and other aircraft equipped with angled pitot tubes. Reflective is 7.75” long.
Forgetting to remove a faded, dull and worn out pitot cover, or having the cover blow off, allowing insects to contaminate your fuel vents, can jeopardize the safety of you and your passengers. The Plane Sights extremely conspicuous and very durable Light Sport/Homebuilt Pitot Plug Kit provides a perfect fit for many homebuilt pitot tubes, light sport pitot tubes, and aircraft fuel vents. The kit includes several vented plugs so it even works with double-tube systems and is guaranteed not to pressurize your pitot static system. The blazing yellow color of the included foot-long, ANSI-compliant and weather-resistant reflective remove-before-flight streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The kit comes complete with three different-sized pitot tube plugs, our unique streamer, and two rust-resistant coated triangle rings. The kit can also be used to prevent insects from plugging your fuel vent, which is known to cause loss of power with Cessna, light sport and home-built aircraft. WARNING: CHECK WITH YOUR AME AND CONSULT YOUR OWNER’S MANUAL BEFORE USING A FUEL VENT PLUG.
Weight: 0.14 kg
Kit includes: Three (3) Plugs: 0.305”ID x6.0”L (7.747mm ID x 152.4mm L), 0.240”IDx 1.5”L (6.096mm ID x 38.10mm L), & 0.302”ID x 2”L (7.671mm ID x 50.80mm L) Two (2) triangle, zink coated rust resistant rings. One (1) very bright foot long remove-before-flight streamer. Guaranteed for two years or your money back!
PN 13-06020 $12.95
Static Wick Cover Set (Tube Style 7")
These round style Static Wick Covers are our lower priced alternative to Static Wick Markers. They protect static wicks from damage on the ground and make wing/elevator tips more obvious, preventing hangar rash. Two styles are available to fit just about every corporate jet. Slide these round style covers on for a tight weather resistant fit on Citations and other jets. We’re the only ones in the industry that offer round static wick covers in a 7” length.
Weight: 0.04 kg
Round, tubular poly cover, 0.310" x 0.450" x 7.000“Long. Replaces Rapco Part#7101-6 *Shock cord lanyard not included
These Square Style Static Wick Covers protect, usually yellow pronged static wicks from damage on the ground and make wing/elevator tips more obvious, thereby preventing hangar/ramp rash. Four styles are available to fit just about every corporate jet. Slide these rectangle covers on for a tight weather resistant fit on Falcon, Hawker, Beechjet, older Lear Jet and many other static wicks.
Weight: 0.21 kg
Includes three (3) Static Wick Covers per package Square Poly, 0.75"x0.25"ID x 3.50" Long, (in stock) (also available by special request, 5.25" length sleves) Replaces Rapco Part# 8808-7 Our standard two year warrantee applies. *Shock cord lanyard not included
This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Universal covers fit any length of tube from the smallest home built ¼” tubes to the largest 1” corporate jet probes. The versatile hook/loop Velcro strap with sewn-in rubberized trim allows the cover to be quickly and securely fastened to the pitot tube.
Weight: 0.00 kg
The inside diameter of the cover is 7/8”. Guaranteed to work on any Cessna, Beechcraft, Cirrus, Diamond, Grumman or Mooney aircraft, as well as most Pipers and many light sport aircraft. Reflective length 7.25" Cover length 5.25" Strap length 10.25"
Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. The Plane Sights 5/8” inside diameter vented pitot plug with its unmistakably conspicuous Remove-before-Flight Streamer provides the perfect easy-on, easy-off solution, while protecting against insect and water contamination. The blazing lime green colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The plug is attached to the streamer’s rugged black oxide coated zinc grommet with a galvanized steel ring, and is vented to prevent pressurization damage to the pitot static system. This 5/8” Plug Fits Aero Commander, Twin Beach, Bonanza, Cessna 300/400/500, Conquest Series, Grumman, Lear, Mooney, Piper Cheyenne and Navajo aircraft.
Weight: 0.04 kg
5/8”/ 0.625” (15.875mm) ID x 1.85” (38.10mm) Useable Length Rust-resistant, fade-resistant, wear-resistant and, like all Plane Sights products, guaranteed for two years!
Forgetting to remove a faded, dull and worn out pitot cover can jeopardize the safety of you and your passengers. Our very durable 3/4” inside diameter vented plug with its unmistakable Plane Sights Remove-before-Flight Streamer provides a perfect easy-on, easy-off solution. The blazing yellow color of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The poly plug is attached to the streamer’s rugged black oxide coated zinc eyelet with a stainless steel ring. This ¾”plug Fits Cessna 150, 152, 172, 177, 182, 200 series, and 337 models.
Weight: 0.04 kg
3/4”/0.75” (19.05mm) ID x 2" (50.80mm) useable length Rust-resistant, fade-resistant, wear-resistant and, like all Plane Sights products, guaranteed for two years, or your money back!
Diamond recommends that operators of their DA40 and DA20 aircraft plug the stall warning air inlet holes on these aircraft while they’re parked on the ground. Developed with feedback from Diamond, the Plane Sights double-sided stall warning plug fits any Diamond DA40, DA50 and DA20, one way or the other. This composite-reinforced, ergonomic stall plug is the perfect all-weather, easy-in, easy-out way to prevent insects and ice from clogging your stall indicator and jeopardizing the safety of you and your passengers. The blazing yellow colour of the firmly attached foot-long, ANSI-compliant and weather-resistant reflective remove-before-flight streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed during your pre-flight inspection.
Weight: 0.15 kg
For all Diamond DA-40 and DA20 models not anti-ice equipped. Guaranteed not to blow off, wear out or fade for two years or your money back
The blazing yellow colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. Each streamer comes complete with eight inches of size-adjustable, highly visible reflective shock cord and safety clips. The cord is attached to the streamer with a rugged black oxide coated zinc eyelet. These features make the streamer ideal for any remove-before-flight application, including gear pins, cowl plugs, AOA indicator cages, TAT, ice detector and static port covers. .
Weight: 0.03 kg
Package Contents: Streamer - 12.25" long x 2" wide, (Shock cord and hooks included with streamer by special request only. All others will come with two metal rings included)
Installed and removed in seconds, Plane Sights Static Wick Covers help prevent delays and inconvenience due to hangar rash. Wing tips and static wicks often suffer ramp damage during maneuvers on the ground. Plane Sights extremely obvious and very durable Static Wick Covers make these vulnerable parts highly visible by day or night. Four styles are available to fit just about every corporate or regional jet. Slide these round style covers on for a tight weather resistant fit on your Bombardier (Challenger & Global Express) or Hawker/Beechcraft and many other jets. If necessary cut with scissors to desired length.
Weight: 0.20 kg
Fit’s over static wick part #’s: Chelton 2-17SC-1,Chelton 2-11SC-1, MIL-9129D, DG17770. Fits Bombardier, Hawker/Beachcraft and others
The new Plane Sights Turbo Prop Tie fits most Turbo Props including Caravans, Beech 1900s, King Airs and others. An adjustable heavy duty ½” shock cord and metal hook allows the versatile design to work on so many turbo prop aircraft. The adjustable shock cord can also be tensioned as the cord loses its elasticity over the years. The design also allows our Prop Tie to Integrate with existing cowl plugs and exhaust covers.
Weight: 0.04 kg
For any Turbo-Prop up with to 10" wide blade. Comes with 36" of HD 1/2" size adjustable shock cord and two stainless clips.
Every two years, over 8 percent of aircraft suffer ground damage. Now there’s a simple, low-cost way to greatly reduce the risk of delays and disappointments due to “ramp rash” damage. Highly reflective markers make vulnerable wing and elevator tips clearly visible under all conditions, and their projecting “proximity fuses” warn that something is too close before damage occurs. Plane Sights universal wing and elevator markers fit all aircraft from Airliners to light sport aircraft, including models with static wicks and strobe lights. For aircraft with tip tanks, the wing marker opening fits over one end of the tank. Plane Sights aircraft markers are available in sets of two to five pieces, for fitting to wing tips elevator tips and propeller blades. A full set, including its free carrying pouch stows under most aircraft seats. Once initial fitting is done, the markers can be installed and removed in seconds during routine pre- and post-flight walk-arounds.
Weight: 0.08 kg
Package Contents: Two (2) corner marker pieces, two (2) harness pieces, two (2) marker fuses, four (4) 54” lengths of shock cord with cord hook ends, and four shock cord hook ends for assembly.
Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. Show line service personnel just how much you care and feel confident about leaving the aircraft. Made from UV resistant Sunbrella, custom bonded with a soft, non-abrasive inner fabric. The compact design and shock cord allow for quick and easy storage without tangling. This prop marker fits aircraft such as a Cirrus SR22, Cessna 206, Cessna 182, Piper Malibu, Beech Bonanza, Beech Barron or similar three blade aircraft with medium, or large size nose cone.
Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. Show line service personnel just how much you care and feel confident about leaving the aircraft. Made from UV resistant Sunbrella, custom bonded with a soft, non-abrasive inner fabric. The compact design and shock cord allow for quick and easy storage without tangling.
SMALL - This prop marker fits aircraft such as a Cessna 150/152 or similar two blade aircraft with small nose cone.
PN 13-05605 $84.00
MEDIUM - This prop marker fits aircraft such as a Cirrus SR20, or similar two blade aircraft with medium size nose cone.
PN 13-05606 $83.75
LARGE - This prop marker fits aircraft such as an older Cherokee Mooney or other two blade aircraft with large size rounded tip nose cone.
PN 13-05681 $84.25
Keep your plane safe from unnecessary ground damage.Each Static Marker also features an integrated Marker Fuse, warning you when your plane comes dangerously close to making contact with another object and preventing static wick breakage.
Weight: 0.04 kg
Package Contents: Three (3) Staic Wick Markers with 9.25” streamers. Six (6) marker fuses and instructions
Pilot Supplies - Covers, Aircraft - Plane Sights Aircraft Markers
