Shop By Brand

Hangar Chat


  Airframe Parts - Controls - Control Attachments
AN665 THREADED CLEVIS TIE ROD TERMINALS

These cadmium plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads.

Click here to view more details.
AN665-10RCLEVIS TIE ROD AN665-10R$10.50
AN665-21RTHRDED CLVIS TIE ROD AN665-21R$11.75
AN665-34RCLEVIS TIE ROD TERM AN665-34R$19.95
AN665-46RCLEVIS TERMINAL AN665-46R$27.25
AN665-61RTHREADED CLEVIS TERM AN665-61R$29.85
 Click here to view more parts like these.  
CABLE END “B” NUT

This universal NAP assembly will eliminate bent or smashed push-pull cable ends and get a strong hold at the same time. The cable end lays in a machined channel at the bottom of the screw hole. ...

Click here to view more details.
05-16210CABLE "B" NUT THROTTLE 222-1$7.95
05-16230CABLE "B" NUT MIXTURE 222-2$7.95
05-16240CABLE "B" NUT CABIN HEAT 222-3$7.95
05-16245CABLE "B" NUT CARB HEAT 222-4$7.95
AN742 PLAIN CLAMPS

Plain loop-type line support clamps, made of aluminum alloy meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensile strength of 50,000 psi.

Click here to view more details.
AN742-D3CLAMPS, PLAIN AN742-D3$0.22
AN742-D4CLAMPS, PLAIN AN742-D4$0.20
AN742-D5CLAMPS, PLAIN AN742-D5$0.45
AN742-D6CLAMPS, PLAIN AN742-D6$0.33
 Click here to view more parts like these.  
AN665 TERMINAL ASSEMBLIES

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

Click here to view more details.
05-02300AN665-10R TERMINAL ASSEMBLY$11.00
05-02400AN665-10L TERMINAL ASSEMBLY$11.50
05-02500AN665-21R TERMINAL ASSEMBLY$11.90
05-02600AN665-21L TERMINAL ASSEMBLY$12.25
05-02700AN665-34R TERMINAL ASSEMBLY$20.75
 Click here to view more parts like these.  
AN486 THREADED CLEVIS FORK ROD ENDS MS27975

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated.

Click here to view more details.
AN486-1PCLEVIS FORK THREADED MS27975-1$15.90
AN486-2PCLEVIS FORK THREADED MS27975-2$15.75
AN486-3PCLEVIS FORK THREADED MS27975-3$16.90
AN486-4PCLEVIS FORK THREADED MS27975-4$16.90
AN486-1032SPECIAL AN486 W/ 10-32 THREAD$9.75
TIE RODS

Streamline and round tie rods available.

Click here to view more details.
CABLE SAFE

A Safe -No-Slip-Grip- for your thru-bulkhead cables. This unit prevents your throttle mixture, choke or any push-pull cable from slipping at the firewall/ bulkhead location. Machined from lightweight aluminum, and blue anodized. Installation is simple with a drill and wrench.

Click here to view more details.
05-16250CABLE SAFE NO SLIP GRIP$9.85
05-16251ADAPT BUSHING 3/16 CABL HOUSNG$3.20
WIRE GRIP

WIRE GRIP - Is a unique fitting which securely attaches to solid wire end push-pull cables. Uses a

Click here to view more details.
05-16000WIRE GRIP 10-32 CONTROL END$12.65
05-16001WIRE GRIP FOR .078 DIA$11.85
BOWDEN CABLE CLAMP

Designed to provide a simple method of anchoring a typical wire wound cable. Used in anchor hole of 7/16

Click here to view more details.
05-157053/16 BOWDEN CABLE CLAMP$12.95
05-032877/32 BOWDEN CABLE CLAMP$12.95
ADJUSTABLE CABLE CONNECTOR

The ACC (Adjustable Cable Connector) provides a strong positive connection with tensioning and maximum linear travel in a confined cable installation. The ACC accomodates three standard cable terminal...

Click here to view more details.
05-01341ADJ CABLE CONNECTOR 1/16,3/32$38.00
05-01342ADJ CABLE CONNECTOR 1/8"$39.30
05-01343ADJ CABLE CONNECTOR 5/32:$45.80
CONTROL MOUNT

SLOTTED BRACKET CONTROL MOUNT - Notch of end fitting locks into slot of bracket to secure control. Steel Construction. CLAMP STYLE CONTROL MOUNT - Protruding finger in clamp holds control in ...

Click here to view more details.
10465SLOTTED BRACKET CNTRL MT 10465$19.50
10464CLAMP STYLE CNTRL MT 10464$11.65
CABLE SAFE II

This Fitting is designed for use on coaxial type control cables. It has a two piece design to allow it to be placed over the cable inserted thru the firewall & tightened down, providing a positi...

Click here to view more details.
05-16252CABLE SAFE II FOR 1/4 CABLE$17.95
05-16253CABLE SAFE II FOR 3/8 CABLE$18.95
BOLT TYPE TERMINAL

Special 3/16

Click here to view more details.
05-16100BOLT-TYPE TERMINAL$0.44
CABLE SAFE ADAPTER

For the cable safe to adapt down to 3/16

Click here to view more details.
05-16251ADAPT BUSHING 3/16 CABL HOUSNG$3.20
6260 RETAINING NUT 7/16-20

The retaining nut threads onto the threaded section of the control on the back side of the instrument panel to secure the control. Replacement retaining nut p/n 6260 for all McFarlane MC6350

Click here to view more details.
05-045816260 RETAINING NUT 7/16-20$6.34
NAS287-25-2 TERMINAL CHAIN 1/16 INCH CABLE SIZE

NAS287-25-2 Terminal chain 1/16

Click here to view more details.
04-02032NAS287-25-2 TERM CHAIN TO CABL$11.75
NAS287-35-4 TERMINAL CHAIN
1/8 INCH CABLE SIZE

Nas287-35-4 Terminal chain 1/8

Click here to view more details.
04-02065NAS287-35-4 TERM CHAIN TO CABL$15.75
NAS287-25-3 TERMINAL CHAIN 3/32 INCH CABLE SIZE

NAS287-25-3 Terminal chain 3/32

Click here to view more details.
04-02064NAS287-25-3 TERM CHAIN TO CBLE$13.95
EYEBALL FIREWALL ASSEMBLY - ALUMINUM SE961-B

A swiveling firewall carry through assembly allows easy installation of cables with oblique entry/exit angles. Assembly includes the eyeball swivel, cable pass through, and line clasper. The Eyeball swivels up to 50 degrees and is clamped in place to complete installation. It comes in 0.125, 0.188, 0.218, and 0.260 inch sizes. The hole is easily enlarged for other sizes.

Click here to view more details.
05-03440SPHERE ALUM GROMMET .125$25.95
05-00957SPHERE ALUM GROMMET .188$25.95
05-01378SPHERE ALUM GROMET .218 .08LB$25.95
05-01379SPHERE ALUM GROMET .240 .08LB$25.95
 Click here to view more parts like these.  
EYEBALL FIREWALL ASSEMBLY - STEEL

A swiveling firewall carry through assembly allows easy installation of cables with oblique entry/exit angles.

Click here to view more details.
05-00764SPHERE STEEL GROMET .125$34.75
05-00766SPHERE STEEL GROMET .188$31.75
05-01381SPHERE STEEL GROMET .218$34.50
05-01382SPHERE STEEL GROMET .240$34.75
 Click here to view more parts like these.  
EYEBALL FIREWALL ASSEMBLY - ALUMINUM TTP

A swiveling firewall carry through assembly allows easy installation of cables with oblique entry/exit angles. Assembly includes the eyeball swivel, cable pass through, and line clasper. The Eyeball swivels up to 50 degrees and is clamped in place to complete installation. It comes in 0.125, 0.188, 0.218, and 0.260 inch sizes. The hole is easily enlarged for other sizes.

Click here to view more details.
05-00722SPHERE ALUM GROMET .125 .10LB$37.85
05-00723SPHERE ALUM GROMET .188 .10LB$34.75
05-01383SPHERE ALUM GROMET .218 .10LB$34.75
05-01384SPHERICAL METAL GROMMET .240$37.50
 Click here to view more parts like these.