Log In - Register
Worldwide Distributor of Aircraft Parts and Pilot Supplies
   
Order Status Page Check Out Page Order Form Page Home Page Shipping Page Contact Us Page Help Page
1-877-477-7823
  Composites - Mixing Supplies
MICHAEL ENGINEERING EPOXY RATIO PUMPS

This highly recommended pump, aptly called Sticky-Stuff Dispenser, will save about 50.00 in epoxy in building a VE type aircraft, plus time, mess, dermatitis, temper and risk of bad batches.

View more details
01-16010ADJUSTABLE EPOXY PUMP 3/4X3/4$283.95
01-0050445:100 PUMP REBUILD KIT$69.95
01-15920EPOXY PUMP RESERVOIR SMALL$10.75
01-15910EPOXY PUMP RESERVOIR LARGE$16.50
01-00258S.S. CHECK VALVE$52.75

EPOXY MIXING CUPS

Unwaxed, flat bottom paper cups in three convenient sizes for small mixes.

View more details
01-256003 OZ MIXING CUP (PKG OF 100)$4.95
01-2570012 OZ MIXING CUP (PKG OF 60)$13.75
01-0032416 OZ MIXING CUP (PKG OF 25)$7.75
01-004168 OZ MIXING CUP (PKG OF 50)$8.25

WEST SYSTEM PUMP PACK

Using Mini Pumps helps ensure accurate metering of resin/hardener mixture. Pumps mount directly on resin and hardener containers. One stroke from each pump delivers proper ratio of resin to hardener. ...

View more details
01-00318WEST SYSTEM 300 RATIO PUMPS$10.95

THE STICKY STUFF RATIO PUMP PORTIONATOR

The "Sticky-Stuff" epoxy ratio pump we have offered for years in our catalog is an economical and practical pump for most homebuilders. For builders and R&D firms needing a more advanced pump, we now offer the MBT Junior.

View more details
01-40000MBT JR. PREC. EPOXY RATIO PUMP$468.90

COMPOSITE TOOL KIT

This kit includes an assortment of many of the commonly required tools used in composite construction.

View more details
01-00166COMPOSITE TOOL KIT$251.95

MIXING STICKS

These mixing sticks are medical tongue depressors which work well for mixing small batches of epoxy. Size: 3/4

View more details
01-25800MIXING STICKS BOX OF 500$10.75

T-88 UNIVERSAL CARTRIDGES

Up until now if you wanted automatic measuring and mixing capabilities the only cartridges available were side by side tubes which required special guns for dispensing. With the Universal Cartridge any medium to high quality caulking gun will work just fine.

View more details
02-00103SYSTEM 3 T-88 2 COMP/ 1 BOTTLE$18.75

PELOUZE PE 5 ELECTRONIC SCALE

Weighs up to 5 lbs. in grams or ounces. Ounces weighed in 1/10 oz. increments. Greatly increases accuracy of mixing resins. Allows the user to use different resin systems with varying mix rat...

View more details
12-01580PELOUZE SCALE PE5$88.75

MULTI-MEASURE PLASTIC CONTAINERS

Use again and again for liquid ingredient accuracy. A must-have item when mixing resins. Seal the liquid in the container with matching sized plastic lid.

View more details
01-009151 QT PLASTIC MEASURING CONTAIN$0.97
01-00926LID FOR QT MEASURING CONTAINER$0.51
01-003302-1/2 QUART CUP$1.86
01-003312-1/2 QT LID FOR PN 01-00330$0.86

BONDO MIXING BOARDS

A handy, rigid polypropylene sheet, 6"Wx8-1/2"L. Ideal surface for mixing Bondo, will not stick. When job is finished, let residue dry, flex board and excess Bondo will pop off, leaving board clean.

View more details
359BONDO MIXING BOARD # 359$1.35

RESIN PUMP SYSTEM

Put an end to mess and worry. make mixing small resin batches a snap. Increse accuracy of resin proportions and performance of resins. Each pump measures a liquid output of 30cc.

View more details
01-00957DISPENSER PUMP PINT CAN$4.35
01-00965DISPENSER PUMP QUART CAN$4.55
01-00973DISPENSER PUMP GALLON CAN$4.75

DISPENSER BOTTLES

Polyethylene bottle with Yorker (applicator) cap.

View more details
01-24905DISPENSER BOTTLE 4 OZ.$0.49
01-24906DISPENSER BOTTLE 16 OZ$0.95

3M™ PPS™
PAINT PREPARATION SYTEM

An innovative system for mixing and preparing refinish material prior to spraying.

View more details
09-017173M PPS CUP & COLLAR 16023$18.95
09-017183M PPS KIT 16024$59.95
09-017203M PPS MINI CUPS & COLRS 16115$24.25
09-017193M PPS MINI LIDS & LINRS 16114$76.85
 More...  

JIFFY MIXER

This is a very effective 2-1/2

View more details
01-00395STAINLESS JIFFY MIXER$22.60

DISPENSER FOR MEKP CATALYST

Perfect to measure and pour catalyst. The bottle will hold 16 oz. of catalyst and dispenses liquid safely and accurately from 2.5 to 35 cc. Measurements are instantly repeatable.

View more details
01-08503DISPENSER FOR MEKP CATALYST$10.85

3M™ PPS™ MINI LIDS AND LINERS 16114

Kit contains 50 each mini lids, filters, liners and 20 sealing caps. Graduated measurement to 5˝ oz (with generic mix ratio film insert). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio insert is purchased separately.

View more details
09-017193M PPS MINI LIDS & LINRS 16114$76.85

3M™ PPS™ MIXING CUP AND COLLAR, 16001

Small, hard cup that supports and holds the PPS small flexible liner, part number 16000.

View more details
09-017153M PPS MIXING CUP & CLR 16001$15.75

3M™ PPS™ KIT 16024

Kit contains 25 each large lids, filters, liners and sealing caps. Graduated measurement to 28 oz/840 mL (with mix ratio film insert). Max. capacity of 32 oz/950 mL (filled to within 1/8

View more details
09-017183M PPS KIT 16024$59.95

3M SCOTCH-WELD EPX PNEUMATIC MIXING NOZZLE

Mixing nozzle will perform to your requirements. With consistent air pressure for easy uniform application, the Duo-Pak cartridge will give you the fl...

View more details
09-013723M EPX PNEU. MIX NOZZLE 9742$1.63

3M MIXING BOARDS

Clean, wax-free surface for mixing body filler. Cured body filler can be easily removed, allowing repeat uses or use the disposable paper board that offers a non-porous, wax-free surface and easy disposal.

View more details
01-01107DYNATRON MIXING BOARD$2.85
01-01108MARSON DISPOSABLE PPR MIX BRD$12.50

 



Order StatusCart/Checkout Search HomeHelpContact Us
ACS Specials/New ProductsShopping ListsPrice MatchSitemap


Copyright © 1995 - 2009 Aircraft Spruce and Specialty Co. All rights reserved. Prices shown are in USD.
Prices, features, and specifications are subject to change without notice.
Images are for reference only and actual product appearance may vary.