Polyfix™ Thermal Fusion is a 3-part system that uses chemical reaction to heat the repair to 142°F, fusing it to the parent part. This system repairs ABS, royalite, graphite, lexan, polycarbon, Kevlar, plexigla...
Flex gap clear rubber toughened can be used in applications where you do not want the adhesive to be seen it is still superir to standard ca.'s when esthetics are important and a flexible bond is requierd this product is your best choice.
Polyfix™ 14000 Thin Cyanoacrylate has a super thin viscosity that penetrate deep into cracks by capillary action and cures in a matter of a few seconds.
This is a higher viscosity ca for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker ca is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds.
POLYFIX™ 10000 Accelerator is o flammable and less then 10% degrade when applied on ca's comparing to methanol and acetone acceletor that has 13/15% degrade.
Its all around ca for ceramics, glass, metal, rubber laminating, soft wood, hard wood. Water resistant. This ca is the best for most clear plastic including GE's Lexan when used with Polyfix™ 10000 Accelerator it will fill most voids it can be carved with a knife or razor blade and sanded to foam a finish indistinguishable from plastic its extra thick.
This has a water thin viscosity that wicks deep into joints by capillary action and curses in a matter of a few seconds. Surface to be bonded must be tight fitting and should be bonded must be tight fitting and should be held together while applying the ca around the edges of the seams, at the moment ca's cure eliminates the irritating fumes from the evaporating monomer that makes repeated of ca's unpleasant at times.
Polyfix™ 64000 carbon extra strength ca is a carbon toughened cynaoacrylate that forms superior shock resistant bonds on non-porus surface the black colored ca has added flexibility for the bonding carbonfiber and other advanced materials as graphite, polycarbon with honeycomb, normax aramid, graphite with aluminum honeycomb.
The patented Thermal Process Catciyticaily (I.c. chemically) generates heat to 142 degrees Fahrenheit and actualy thermal sets or fuses the repair to the Patent material.
Apply a light fog of Polyfix™ 10000 accelerator and apply Polyfix™ 17500+ gap filling. Cures to a more flexible consistence for better shock absorption, when ever a larger amount of ca is to be used in such applications as saturating fiberglass or kevlar.
Composites - Repair Kits - Poly Fix
