CERTIFIED COATINGS PRODUCTS, located in Los Angeles, has been manufacturing aircraft dopes, thinners and special products for the aircraft industry for 50 years. A small company making good quality, h...
A blend of solvents used for viscosity and drying control of Poly-Brush, Poly-Spray and Poly-Tone. Blend #R-65-75 is recommended as the standard reducer in normal weather, 65°75°F. #RR-8500 is...
An excellent clear gloss epoxy varnish for interior and exterior use. It provides superior weather durability and excellent chemical and solvent resistance. Can be used over a one component var...
Can be used as a reducer for enamels, wing walk compound, zinc chromate primer, etc. CERTIFIED COATINGS PRODUCTS, located in Los Angeles, has been manufacturing aircraft dopes, thinners and special ...
Ranthane is a low viscosity, very high solids polyurethane material resulting in low film weight providing a lasting high gloss. Will withstand most chemicals, engine oils, and hydra...
Top quality enamels for metal and plastic surfaces. See color selection chart to match popular dope colors. Intended for spray application. Dry dust-free in one hour and harden overnight....
Silver Urethane Fabric Primer is a polyurethane product that serves two purposes: to build the coating over the fabric to prepare for paint, and to protect the fabric from UV radiation. Silver Primer uses a metallic-like flake additive. This proven system results in a positive metallic light block and reflection to both visible and invisible UV without relying on chemical UV light blockers.
PTI’s No POP is a retarder specially formulated solvent that is not photo chemically reactive. This product is used as an additive to slow down the dry time of fast drying paints and primer. During hot and dry temperatures, coatings have a tendency to “solvent pop” and/or “dry spray”. That is, small air bubbles forming at the surface of the paint or the paint drying before it hits the substrate. This retarder keeps the material wet allowing it to flow, dry, and cure as it should.
PTI-MEK is virgin (not recycled) MEK that may be used to clean and prepare the substrate for painting. PTI-MEK may also be used to clean brushes, paint guns and other painting tools.
PTI-Acetone is virgin (not recycled) Acetone that may be used to remove lacquer finishes, for cleanup after painting, and to soften lacquers or acrylics that set up in spray guns or hoses
CERTIFIED COATINGS PRODUCTS, located in Los Angeles, has been manufacturing aircraft dopes, thinners and special products for the aircraft industry for 50 years. A small company making good quality, h...
PTI-Toluene is virgin (not recycled) toluene that may be used as a reducer for enamels and other coatings in the alkyd family. Do not use with PTI chromate and chromate free primers. Instead, use PT-1022X66 reducer.
CERTIFIED COATINGS PRODUCTS, located in Los Angeles, has been manufacturing aircraft dopes, thinners and special products for the aircraft industry for 50 years. A small company making good quality, h...
Covering Material - Reducers/Thinners
