Shop By Brand

Hangar Chat



  Engine Parts - Heaters - Tubing Connectors
2 INCH DIAMETER Y TUBE

"Y" tube is designed to be used with the Homebuilders cabin heat box to make warm air available to 2 or more locations in the aircraft.

Click here to view more details.
08-041002" DIAMETER "Y" TUBE EXPANDED$31.85
08-041302" DIA "Y" TUBE NON EXPANDED$29.85

FLANGED DUCT

Accepts 2” ducting on both ends. Helps route ducting through bulkheads, firewalls, etc. Especially useful for getting heat to the back seat of the aircraft.

Click here to view more details.
08-04140FLANGE DUCT FOR 2" TUBING$14.85

TUBING CONNECTORS

2” ALUMINUM FLANGE - Accepts 2” scat tube.

Click here to view more details.
08-041352" ALUMINUM FLANGE$9.90

2” DIAMETER 90° TUBE

This unit is designed to slide over the end of the 2” O.D.

Click here to view more details.
08-008632" DIA 90 DEG TUBE$26.50

CARB HEAT CONNECTOR

Mounts on FAB airbox or similar airbox. Flange accepts 2” scat tube from muff.

Click here to view more details.
08-04145CARB HEAT CONNECTOR FOR 2"$17.95

SHUT OFF VALVE TUBE CONNECTOR

Expanded on one end to 2 inch I.D. to slip over a 2 inch O.D. tube to regulate or shut off air. Also available non-expanded for in-line applications. Weight is 2 ounces.

Click here to view more details.
08-07305AVIACOMP SHUT OFF VALVE$67.50

2 INCH DIAMETER Y TUBE WITH SHUT-OFF VALVE

This is a DL-010 Y Tube, modified with a shut-off valve in the straight run tube. The shut-off valve enables the builder to divert the flow of air from the straight tube and direct all or part of the air flow to the angled tube. Furnished with one stainless steel hose clamp.

Click here to view more details.
08-072962" Y TUBE W/ SHUT OFF VALVE$59.85

T TUBE CONNECTOR

Expanded on short leg to slip over a 2 inch O.D. tube to divert air in two directions. Especially handy for close to the firewall applications. Also available with non-expanded short leg. Weight is 1.7 ounces.

Click here to view more details.
08-07304AVIACOMP T CONNECTOR$31.75

MODIFIED VA175 TUBE CONNECTOR

This is a DL-010 Y Tube, modified with a shut-off valve in the straight run tube. The shut-off valve enables the builder to divert the flow of air from the straight tube and direct all or part of the air flow to the angled tube. Furnished with one stainless steel hose clamp.

Click here to view more details.
08-07306AVIACOMP MODIFIED VA175$59.95

2-1/2 INCH Y TUBE CONNECTOR

With 2 inch offshoot. If you are running 2.5 inch tubing in one area and 2 inch to another, this is your part. Weight is 1.8 ounces.

Click here to view more details.
08-07303AVIACOMP 2 1/2" Y TUBE$38.90