1-877-4-SPRUCE | info@aircraftspruce.com
Aircraft Spruce & Specialty Co.
 
 
THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE
Home / Avionics / Intercoms / PS Engineering /PS Engineering Pm 1000II 4 Place Mono Panel Mount Intercom For Certified Aircraft - Without Crew - Open Box
Main Image

PS Engineering Pm 1000II 4 Place Mono Panel Mount Intercom For Certified Aircraft - Without Crew - Open Box

0 Reviews 0 Answered Questions
Now $419.95/Each
Was $459.95
Save 8%
Quantity
Add to Wishlist
Part# 99-02058
MFR Model# 11922

Overview

Note: This item has previously been opened and is missing pieces of the installation kit. See below

Pilot isolate, crew isolate, and dual entertainment sources allow full flexibility, even giving pilots the option to feed monaural music to the passengers and allow them to chat among themselves without disturbing the front seats. (Note: crew isolate and dual music requires the 11920 model)

  • Soft Mute circuitry is our standard-setting solution for managing the music volume levels against radio reception and transmission.
  • Automatic fail-safe interconnect to the aircraft radio wires the pilot's headset to the aircraft radio in the event of disrupted power or related failure.
  • Separate pilot and copilot transmit capabilities ensures that only the person pressing the PTT will be heard over the radio. A red transmit light is illuminated when a PTT is pressed -- this also serves as a "stuck-mic" indicator.
  • Independent intercom volume settings do not affect radio equipment volume levels, allowing better control over communications.
  • An optional digital recorder can provide up to one minute of storage of radio receptions. A continuous loop recorder, it does not record "dead air time", giving the pilots an option to store up to 16 messages at any one time.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Specifications

  • Input power: 13.8 - 27.5 Volts DC
  • Current Drain: < 250 mA (1 Amp Circuit breaker)
  • Headphone Impedance: 150-1000 ohms typical
  • Audio Distortion: <10% @ 75 mW into 150 Ω load
  • Aircraft Radio Impedance: 1000 Ω typical
  • 3 dB Mic Frequency Response: 350 Hz — 6000 Hz
  • 3 dB Music Frequency Response: 200 Hz to 15 kHz
  • Unit weight: 12 Ounces (0.342 kg)
  • Dimensions: 1.25" H x 2.60" W x 5.50" D
  • (3.2 x 6.6 x 14 cm)
  • Environmental and technical qualifications: RTCA DO-160B/DO-170
  • Temperature -20ºC to +55ºC
  • Altitude 50,000 ft.

Documents

In The Box

  • Included:
  • (2) Concentric inner knobs - 625-002-0004
  • (2) Outer knob - 625-002-0001
  • Cap with pointer - 625-010-0002
  • (1) Reversible aluminum face plate - 575-002-0004
  • (1) Reversible face plate w/crew - 575-002-0002
  • (1) 4-place mono jack kit (phones and mic jack, insulating washers and 1/8" music jack) - 11910
  • (1) Pilot's Guide - 202-123-0001
  • (1) Drill Template - 122-102-0001
  • Missing:
  • (2) #4-40 Machine Screws, black - 475-442-0002
  • (1) 25 pin Sub-d connector shell - 425-025-0095
  • (25) Male Pins - Crimp - 425-020-5089
  • (1) Connector hood - 625-025-0001

Reviews

Submit a Review

Q&A

Submit

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.