• Wishlists
  • 877-477-7823
  • Contact Us
 
 
FREE SHIPPING ON ORDERS OVER $350 VIA UPS GROUND | 877-4-SPRUCE
Thumbs 1
Thumbs 1

PS ENGINEERING PAR200A AUDIO PANEL WITH REMOTE VHF RECEIVER - TSO FOR CERTIFIED AIRCRAFT

$2595.00/Each
Add to cart for current price
Quantity
Add to Wishlist
Part# 11-13036
MFR Model# 050-228-0200

Overview

PS200 vs PS200A:
PS200 "Volume Control Music" is now PS200A "Volume Control Radio"


FAA TSO’d for Certified Aircraft

• 4-place stereo IntelliVox® intercom, a 10 Watt Speaker Amplifier, and accesses a 2280 channel VHF aviation radio. (Selectable 8.33KHZ)
• Bluetooth capable. Pairing of phones or Bluetooth® enable audio devices is easily achieved for wireless entertainment.
• Features automatic radio squelch which assures that the radio trip level is always optimally set.
• Two different inputs and two types music distribution. The standard configuration allows music 1 (or Bluetooth® to go to the crew while the passengers hear music 2. The other selection allows music 1 (or Bluetooth) to go to all headsets.
• Monitor Mode allows the pilot to hear the Active and Standby frequencies at the same time.
• Up to 5 discrete radio frequencies can be stored in non-volatile memory for quick dial up.
• Features fully independent power supplies so you can power up the radio or audio panel individually.
• The PAR200A uses the same tray and connector as the GMA240, GMA340, PMA8000 series. However, there is additional wiring that is required to interface the Com Radio to the audio panel.

Specifications

  • WEIGHT: PAR200A Unit: 1.1 lb. (0..49 kg) / Rack with connectors: 0.51 lb. (0.24 kg)
  • DIMENSIONS: Dimensions Height: 1.3 in. (3.3 cm) Width: 6.25 in. (16.9 cm)
    Depth behind panel 7.15 in. (18.16 cm)
  • AUDIO PANEL POWER REQUIREMENTS: Voltage: 11-33 VDC: Maximum Current: 2.5 Amp (Externally protected by a 3A pull-type circuit breaker)

Harness

  • PS Engineering requires all units to be sold with custom harness in order to maintain factory warranty. Units sold without harness will receive no factory warranty. All PS Engineering orders with custom wire harness are build to order and require all questions to be filled out to process correctly. Any custom order not complete will cause delays. All custom harnesses are built to IPC-WHMA-A-620 standards via the manufacturer’s installation manual. Any additional comments or special requests may be noted in the Special Instructions field at checkout for review by the avionics team. For questions regarding custom harnesses for PS Engineering please email avionics@aircraftspruce.com or call us at 800-826-3160.

In The Box

  • The PAR200A system combines an audio control panel, high fidelity 4-place stereo intercom with IntelliVox®, Bluetooth® connectivity, and a remote mounted EASA/FAA Certified Trig Avionics VHF aviation communications transceiver.
  • Customers Also Viewed
  • Frequently Purchased With

Reviews

Again the only complaint are the detents very easy to over shoot your frequency in bumpy air. Otherwise a awesome little radio

Gregory M
April 22, 2019

Great unit. Works flawlessly. Takes a bit of getting used to the controls and what knobs perform which functions. The only thing I wish it had was a way of adjusting the brightness/contrast of the display from the front of the panel. There is a way to adjust the contrast of the unit from the top but the unit has to be out of the tray to do it. None the less it is a great combination of audio panel/intercom and com.

Edward S
December 28, 2018

Compact, light weight, and full featured audio panel and com radio. Somewhat complicated to learn the many features with so few buttons and knobs, but once you learn it, the PAR200 is VERY versatile. The only thing I still notice is the detents in the tuning knobs are very light feeling compared to any other aircraft radio. Works great, just feels different and its easy to overshoot your frequency. Com radio is listed as lower wattage than my 430W, but it transmits as well or better than the 430Ws com.

B B
September 20, 2016

Q&A

Q: Which Trig radio does this PS Engineering PAR200A come with?

Per the manual this will come with the TY91.

Q: Does the optional 4 place wire harness include wires in the connector for all of the functions? How long is the optional 4 place wire harness?

When ordering this item there will be a list of questions, part of those questions includes what units this will go to as well as the lengths required for your harness.

Q: Are the headphone and microphone jacks, remote radio, and PAR200 connector all pre-connected into the harness based on the dimensions given in the questionnaire?

Yes, the harness and interconnects are fully completed for installation with the jacks on the end.

Q: Is the TC90 interface controller (head) included with this package? If so, can the radio be wired to be controlled by both the TC90 and the PAR200A?

A TC90 interface controller is not included with this package. Though it does not include this additional control head, the addition of a TC90 will allow for control from both the TC90 as well as the PAR200A.

Q: Can a second TY91 remote comm radio be connected to the PAR200A so as to have TY91s for both comm1 and comm2?

The Par 200 is capable of taking two comm radios. Yes, this can be done.

View in Catalog

View Image View in Catalog