EVERYTHING FOR PLANES AND PILOTS SINCE 1965 | 877-4-SPRUCE

Aeropoxy Laminating Epoxy

From $21.50 to $1976.00
Description Quantity Pot Life Part Number Price Buy
PR2032 ResinQuart-
01-42125
$55.75
Quantity
PR2032 Resin3/4 Gallon-
01-42140
$146.75
Quantity
PR2032 Resin5 Gallon-
01-42155
$737.00
Quantity
PR2032/PH3660 KitQuart Kit1 Hour
01-42135
$76.85
Quantity
PR2032/PH3660 KitGallon Kit1 Hour
01-42150
$207.95
Quantity
PR2032/PH3660 KitPail Kit1 Hour
01-42165
$987.00
Quantity
PH3630 HardenerPint30 Minutes
01-00160
$23.50
Quantity
PH3630 HardenerQuart30 Minutes
01-00161
$61.85
Quantity
PH3660 HardenerPint1 Hour
01-42130
$23.50
Quantity
PH3660 HardenerQuart1 Hour
01-42145
$61.95
Quantity
PH3660 Hardener2 Gallon1 Hour
01-42160
$251.95
Quantity
PH3663 HardenerPint90 Minutes
09-05266
$21.50
Quantity
PH3663 HardenerQuart90 Minutes
09-05267
$62.50
Quantity
PH3663 Hardener2 Gallon Pail90 Minutes
09-05268
$265.95
Quantity
PH3663 Hardener30-Gallon Drum90 Minutes
09-05269
$1976.00
Quantity
PH3665 HardenerPint2 Hours
01-00162
$23.50
Quantity
PH3665 HardenerQuart2 Hours
01-00163
$61.95
Quantity
Subtotal $0.00
Add to Wishlist

Overview

PR2032 is a medium viscosity, unfilled, light amber laminating resin that is designed for structural production applications. Three hardeners are available for use with PR2032. PH3660, has a 1-hour pot life. When used with either of these hardeners, the system gives excellent wet-out of fiberglass, carbon and aramid fibers. Special additives have been incorporated into this system to promote chemical adhesion to fabrics made with these fibers.

The AEROPOXY systems will cure completely at room temperature, or can be given an elevated temperature cure. AEROPOXY contains no MDA (a known liver toxin and carcinogen) and meets or exceeds current OSHA requirements for safe use. It satisfies all structural, pot life and wet-out characteristics according to tests by Rutan Aircraft Factory, and RAF recommended its use for all homebuilt aircraft applications.

The best ratio on AEROPOXY is 100:27 by weight or 3 to 1 by volume. In early 1996 several improvements were made to AEROPOXY. The viscosity was lowered for easier laminating, the occasional slight surface tackiness in high humidity was eliminated, the AEROPOXY hardeners were modified to prevent any tendency to crystallize in high humidity, and the mix ratios were modified to an exact 3 to 1 by volume.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Nice and fresh product

John B Verified Purchase

PH3660 HARDENER QUART

March 27, 2024

Nice and fresh product

John B Verified Purchase

PR2032 RESIN 3/4 GALLON

March 27, 2024

Consistent product. Double bagged for shipment prevents spillage from occurring and damaging other products

John B Verified Purchase

PR2032 RESIN 3/4 GALLON

January 10, 2024

John B Verified Purchase

PR2032 RESIN QUART

December 9, 2023

The product is fine and does what its supposed to do. Read the description as a pint can doesnt have 16 fluid ounces. This is as packed by the manufacturer, not an ACS caused problem...

John B Verified Purchase

PH3660 HARDENER PINT

December 9, 2023

Arrived promptly and in good shape

Roy C Verified Purchase

PR2032/PH3660 QUART KIT

December 5, 2023

So far so good. I used it for the first time recently and it has met every expectation. Viscosity is low so it spreads similar to house paint, perhaps a tad thinner (at temperature of about 65 degrees). Probably would run thinner at higher temps. Unfortunately, it is fall here and my workshop stays cool (55-60 degrees F) so it has been over 35 hours and it is still slightly tacky. My only complaint is the containers, and getting the stuff out into a measure cup. It gets messy because it’s hard to pour without spilling. Anyone know it there is a pour spout for these qt cans??? That would help. Otherwise, 5 stars.

Rjh
November 25, 2023

Richard M Verified Purchase

PR2032/PH3660 QUART KIT

July 20, 2022

Worked as expected.

Joseph J Verified Purchase

PR2032/PH3660 QUART KIT

March 24, 2022

Aero-poxy is the finest epoxy I have ever used. I have never had am issue using this product. In fact, its the only eopxy I will use. It matters not what your project call for, Aero-poxy has the right mix for piece of mind and confidence in my final product. .

James O Verified Purchase

PR2032/PH3660 GALLON KIT

February 11, 2022

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: The pot life is 60 minutes, what is the cure time?

24hr, at room temp, is recommended. Heat can be applied to accelerate the cure time. Please see the Tech Data Sheet under the "Documents" tab for more info.

Q: Do these cans come with pumps or do I need to purchase them separately? If purchase separately, will West Systems pumps that you sell work?

They do not come with pumps but you can use the west system pumps on the Aeropoxy kit. P/N# 01-00318.

Q: How do clean this AEROPOXY up (tools and surfaces)? What solvent do I use?

Acetone is commonly used for cleaning un-cured epoxies. We also have Replacetone, 01-08823, which is a non-haz cleaner for un-cured epoxies.

Q: Can the hardeners be mixed prior to mixing with resin to achieve different pot life and cure times?

As long as the hardeners have the same ratio they can be blended. 3630/3660/3665 are all 100:27.

Q: Is Aeropoxy safe to use over closed-cell polystyrene foam?

Yes, this is safe to use with closed-cell polystyrene foam.

View in Catalog

View Image View in Catalog