|Voltage||Description||Model No.||Part Number||Price||Buy|
|14v||2-1/4" No Cutout||LW2014||11-03851||$54.95|
|14v||2-1/4" with Left Cutout||LW2014A||11-01257||$54.95|
|14v||2-1/4" with Right Cutout||LW2014B||11-04373||$54.95|
|14v||3-1/8" No Cutout||LW3014||11-02572||$54.95|
|14v||3-1/8" with Left Cutout||LW3014A||11-02673||$54.95|
|14v||3-1/8" with Right Cutout||LW3014B||11-02574||$54.95|
|14v||3-1/8" with Left + Right Cutout||LW3014AB||11-00818||$54.95|
|14v||3-1/8" for Altimeters||LW3014AA||11-02573||$56.75|
|14v||3-1/8" for VSI||LW3014V||11-01099||$54.95|
|14v||4" Light Bar||LB4014||11-02788||$54.95|
|28v||2-1/4" No Cutout||LW2028||11-02571||$54.95|
|28v||2-1/4" with Left Cutout||LW2028A||11-04374||$54.95|
|28v||2-1/4" with Right Cutout||LW2028B||11-04375||$54.95|
|28v||3-1/8" No Cutout||LW3028||11-03852||$54.95|
|28v||3-1/8" with Left Cutout||LW3028A||11-02762||$54.95|
|28v||3-1/8" with Right Cutout||LW3028B||11-03853||$54.95|
|28v||3-1/8" with Left + Right Cutout||LW3028AB||11-01352||$54.95|
|28v||3-1/8" for Altimeters||LW3028AA||11-02851||$54.95|
|28v||3-1/8" for VSI||LW3028V||11-01230||$54.95|
|28v||4" Light Bar||LB4028||11-02789||$54.95|
NULITEs are a revolutionary lighting system for aircraft instruments. They give the same lighting appearance as internal lighting kits at a fraction of the cost. NULITEs have a special bezel that focus light toward the instrument, preventing light from reflecting into the pilot’s eyes. When sandwiched between the instrument and panel, NULITEs reduce glare and “hotspots” by concentrating 60% of the light on the upper half of the instrument.
Will not work with DC to AC inverted systems
INSTALLATION MADE EASY
No special tools or equipment are required. NULITEs can be installed by anyone in just a few minutes; a simple log book entry is made by any certified pilot or mechanic. NULITEs are wired into any existing dimming system without the need for extra circuits, inverters, or remote boxes.
Love the Nulite system. Have it for all of my instruments. This was a replacement as one failed. I know there is a lifetime warranty, not sure if that apples as I had to ream out the opening for the altimeter. Overall, very happy with the lights!
I liked how Nulites fit and worked. Aircraft Spruce was great. I did find the lites where good on 1/4 to 1/3 of the instrument. The rest of the instrument was a little too dark. Quite a bit different than the Omni OBS which has the hole dial lit up.
Why didnt I lose my post lights earlier? Sooo much better. A bit longer installation than I though, but worth it.
Fast service as usual
I purchased the Nulite 4x3/4 inch light bar. Great item. It showers light down over a 6 inch area to light switches, or in my case horizontal unlighted square engine gauges in a Cessna 172. The bar can be trimmed with a rotozip, and I even sanded off some of the painted back to allow light to go in the opposite direction too. I attached to the back of the plastic overlay panel with some RTV silicon. Tied in to existing post light wiring.
Great product. Should have bought these earlier. Very easy to install
Good product, easy to install, fast service by Aircraft Spruce.
Yes we do. Please see the "Similar Items" tab on this web page for a link to the 28V page. You can also use or search and enter part number 11-02571 and it will bring you directly to the web page.
The Nulite was designed to go behind the panel due to its shape and to avoid having the electrical wire exposed. It is not recommended to mount in front of the panel.
The bezels are .200". It is countersunk in the back and actually sits into the panel so it moves the instrument back approximately 1/8 of an inch.
maximum of 125 ma. with an average load of around 80 ma
These are used around the instruments on the panel to illuminate the display for night time operation.
The shape of the VSI is different than the other gauges. Take a look at the photo for part # 10-05363 on our website. You can see that the bottom left corner of the VSI is larger than the other corners. The VSI and the altimeter are the two instruments that have a unique shape.
No, see part number 11-13932 for LED options.
Each Nulite weighs approximately 0.04 lbs.
These lights are white.
Cutting the Nulite system is possible, but the manufacturer warranty is voided when custom modifications are made tot he unit.