• Wishlists
  • 877-477-7823
  • Contact Us
 
 
FREE SHIPPING ON ORDERS OVER $350 VIA UPS GROUND | 877-4-SPRUCE
Thumbs 1
Thumbs 1
Thumbs 1

WHELEN ORION™ OR5001V / OR5002V POSITION / ANTI-COLLISION TAIL LIGHT WHITE FAA TSO

Select Voltage:
12 volt28 volt
Quantity
Add to Wishlist

Overview

Whelen Engineering is proud to introduce the ORION500 Series of FAA/TSO approved LED aviation lighting. Incorporating the latest state-of-the-art LED Technology available in an all-inclusive package, the ORION500 series eliminates the need for external flasher boxes. Flush mountable for a wide variety of applications with minimal integration and easily retrofit-able to the Whelen legacy strobe products. The ORION500 series is quite simply the brightest form of LED Anti-collision and Position lighting available.

ORION™ 500 Position/Anti-Collision Light-head:
All LED self-contained wingtip mounted Position/Anti-Collision system. Eliminates the need for external power supplies and reduces current draw and provides thousands of hours of operation.
  • Fully FAA/TSO-C96a & TSO-C30c Approved
  • FAR SPEC Certified
  • STC SA800EA
  • Replaceable hard coated polycarbonate lens to maintain maximum light output
  • Aerodynamic design without sacrificing light output
  • Exceeds FAA minimum intensity requirements for maximum visibility and increased safety of flight
  • Environmentally tested and certified to RTCA/D0-160G standards

Specifications

  • Drawing Number: 71774
  • Weight: .28 lbs (127gm)
  • Current Draw (12V/28V):0.20/0.10 Amp (Position), 0.38/0.19 Amp (Anti-Collision)
  • Position LED Colors: Aviation White
  • Anti-Collision LED Color: Aviation White
  • Lenses: Clear Hardcoated Polycarbonate
  • Dimensions (H x W x L): See Dimension Drawing

Drawing

  • Accessories
  • Customers Also Viewed
  • Frequently Purchased With

Reviews

Good quality light and strobe had to make some modifications to the old bracket disassemble it completely and enlarge hole to fit new light removed old power pack also my A36 power is fed from one switch leg this will need to be tied into the position and strobe together that way both will work same time works great just took around 4 hrs Kyle

Kyle G
May 12, 2019

I like the tail light. I am upgrading my 1984 Starduster Too to LED Navigation/Position lights. As such I am working to use the existing installation mounts. This has proven difficult. After a few calls to both ACS and Whelen I found through a friend that ACS has a bracket I can modify to help retrofit to this light. I was frustrated that both companies could not find this bracket. Part Numbers: 11-06900 and 11-07000, see Accessories

Jody C
March 2, 2019

Electro A
May 4, 2018

Installed the Whelen - Orion 500 12 volt tail light/strobe on my Mooney M20C , was a major improvement over the original, and is really bright, Was very easy to install, Along with the Whelen -Orion 650 wingtip light/strobe and Whelen LED landing light my Mooney has a high visibility for other planes in the air. Money well spent for safety.

Bob F
October 19, 2016

Q&A

Q: Is there any reason the Orion 500 series lights can not be mounted on top of the vertical stabilizer?

Per Whelen, the Orion 500 Series Lights are designed to be mounted on the tail area, vertical stabilizer / rudder etc facing aft. However, the mounting screw holes are at 12 oclock and 6 oclock, not 3 and 9, so a minor modification will be necessary.

Q: Is the OR5001V a direct replacement for the A500AHD1?

Yes, the Orion 500 series (11-11975) is a LED replacement for the strobe style (11-03717).

Q: What is the type and size of wire I should run from cockpit when installing this Whelen Orion 500 series lighting?

We recommend shielded wire, the size will depend on the voltage of your system and the length of the wire.

Q: Can these units be mounted horizontally in a wig tip location as well as vertically in the tail to replace 11-03717 style units?

No, these lights are intended for tail mounting only. For wingtip see the OR 650 series 11-11966.

Q: Do you need a special power supply for the strobe portion of the Whelen Orion 500 series to work?

No, a separate power supply is not necessary to run these LED lights.

Q: Does the Whelen Orion 500 series lighting ship with form 8130?

No, if does not come with an 8130, but you can request it at the time of order for an additional cost.

Q: Can we connect the Whelen Orion 500 nav light wire with the strobe wire or is a separate power source wire necessary?

It is recommended to run a separate power wire for each function. This allows the pilot to turn off the strobe function when it has the potential to interfere with ground operations and other pilots.

Q: Do I need to use shielded wire with the Orion 500 lighting?

No. Shielded wire is not necessary for the Orion product line. Unshielded is acceptable.

Q: Does this rear tail light have a strobe built into it as well as stay lighted consistantly?

It has a steady burn and flash(strobe.)

Q: WHELEN ORION™ OR5001V / OR5002V POSITION / ANTI-COLLISION TAIL LIGHT WHITE FAA TSO fit a PA18?

It will fit. It has the same footprint as a single bulb tail light.

View in Catalog

View Image View in Catalog