P (panel thickness) .062 F (frame thickness + .062 GRIP (total thickness) = .124 |
|
Total material thickness "G" consists of the thickness of all materials to be fastened. This must include the thickness of the material "P" to which the stud assembly is attached, the material "F" to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration. |
STUD SELECTION TABLE |
Using 212-12 Receptacle |
Total Grip Thickness | Use 2600 | Use 2700 |
.020 - .059 | 2600-1 | 2700-1 |
.060 - .089 | 2600-2 | 2700-2 |
.090 - .119 | 2600-3 | 2700-3 |
.120 - .149 | 2600-4 | 2700-4 |
.150 - .179 | 2600-5 | 2700-5 |
.180 - .209 | 2600-6 | 2700-6 |
.210 - .239 | 2600-7 | 2700-7 |
.240 - .269 | 2600-8 | 2700-8 |
.270 - .299 | 2600-9 | 2700-9 |
.300 - .329 | 2600-10 | 2700-10 |
.330 - .359 | 2600-11 | 2700-11 |
.360 - .389 | 2600-12 | 2700-12 |
.390 - .419 | 2600-13 | 2700-13 |
.420 - .449 | 2600-14 | 2700-14 |
4002 SERIES (Large Head) STUD SELECTION |
To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. After determining the total grip thickness, use the grommet column under which the selected grommet and receptacle appear. Use the dash number which appears opposite the determined total grip thickness. |
Example: If the total determined grip thickness "G" was .144, the stud dash number for the above 4002-G grommet and 214-16 receptacle would be -4. The stud part number would be 4002-4. |
Total Grip Thickness Range "G" | 4002-G Grommet & 214-16 Receptacle | 4002-N, 4002-0 Grommet & 214-16 Receptacle |
.021 - .050 | --* | -1 |
.055 - .080 | --* | -2 |
.081 - .110 | -2* | -3 |
.111 - .140 | -3 | -4 |
.141 - .170 | -4 | -5 |
.171 - .200 | -5 | -6 |
.201 - .230 | -6 | -7 |
.231 - .260 | -7 | -8 |
.261 - .290 | -8 | -9 |
.291 - .320 | -9 | -10 |
.321 - .350 | -10 | -11 |
.351 - .380 | -11 | -12 |
.381 - .410 | -12 | -13 |
.411 - .440 | -13 | -14 |
.441 - .470 | -14 | -15 |
.471 - .500 | -15 | -16 |
.501 - .530 | -16 | -17 |
.531 - .560 | -17 | - |
*4002-G grommet requires .090" minimum grip. |