EVERYTHING FOR PLANES AND PILOTS SINCE 1965 | 877-4-SPRUCE
Thumbs 1
Thumbs 1
Thumbs 1

Teakwood Standard Grips

Select Hand:
Right HandLeft Hand
Select Size:
3/4 Inch7/8 Inch1 Inch1-1/8 Inch
Quantity
Add to Wishlist

Overview

Teak wood is beautiful, absorbs sweat, preventing any sticky slime build-up. Grips come in standard, master and ultra styles in left and right hand. The standard grip comes with a push button on its top with a special dust proof cover. Normally is used for a push-to-talk button, is normally open switch and is good for 250,000 cycles minimum. The master grip has larger head to accommodate a 4-way trim switch & push-to-talk button.

The trim switch is the same one used with M.A.C. systems. The ultra grip has a larger surface to accommodate the 4-way trim and a auto-pilot and/or air brake with the push-to-talk located near the tip of the index finger. The ultra can handle a total of four switches, when using the air brake, in its head. Configurations can also be custom designed. All grips come with buttons and a 3/4", 7/8", 1" or 1-1/8" standard bore. Larger bores available.

Comes with Push-to-Talk.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

I have been flying with these grips for over 15 years and 1200 hours and had forgotten how comfortable they are until I let another very senior pilot sit in my plane. The first thing he exclaimed was, Wow, this grip is SO comfortable! I made one small modification to the pilots grip in that I drilled a two-step hole in the trigger position for the Autopilot disconnect button.

Bill
January 9, 2023

I love these grips. Perfectly contoured to the hand and a nice soft finish.

Gary V Verified Purchase

CAG STANDARD TEAKWOOD LEFT GRIP 1" BORE

April 28, 2022

Ordered both left and right, 1 inch. In stock, quickly delivered. Dry fit, slightly larger than OD of control sticks, little bit of RTV will fix that. Nice feel to them, cannot wait to finish restoration to go fly!

Sean S
May 10, 2021

It was as described. The finish and sanding are very good. I was surprised by how light they are.

Michael D
February 16, 2021

Accurate per description. Fits perfectly.

Jim D
January 2, 2020

Very pleased with the quality of these items (I have a left and right handed grip for P1 & P2) Easily bored out to metric and its installation has significantly enhanced the quality of the cockpit.

Richard E
April 21, 2019

Very good quality! Easily sanded to make personal adjustments.

Glen B
January 4, 2019

I have the single switch model in my Tango 2, and I love it! I've only been using it for ~50 hours, so it still feels rough in a few places, but the shape is very form fitting, and easy to hold.

Justin G
June 14, 2013

Good Quality Grip I easily bored thru and thru to 7/8 for my application. Ordered 2nd one for Right hand application in other A/C.

Daniel F
May 27, 2017

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is it possible to purchase a plain grip without any holes in it for ptt switches? This grip would be used in the front seat (passenger) area of a Skybolt biplane.

Yes, we can special order it. They have a $20 min charge for a special order, and has about a 1-2 week lead time. Contact our sales department for any other details.

Q: Can these be used for a grip on a cessna yoke?

Per the vendor, no. These cannot be used on any type of yoke.

Q: Are spacers available to make these teakwood standard grips fit a 7/8 tube?

These are available in 7/8", however, they are special order in this size. Please contact our sales team or use the "Contact Us" link in the top right portion of the web site to set up the special order.

Q: Does the grip come standard with the PTT switch?

Yes, these teakwood standard grips are stocked with PTT switches.

Q: For the Teakwood Standard Grips, can I buy the just the PTT switch to replace my older one?

Yes, this would be part number: 11-14195.

Q: Installation appears to be a slip fit over the control stick. How is the grip made to fit securely on the stick. Is there an elastic sleeve inside the grip that ensures a snug fit?

Installation is simply applying any silicone adhesive. That's it. It secures the wood grip firmly, but also makes it easier to remove when it's necessary.

Q: What is the size of the hole for the PTT button?

The hole is .393701.

Q: how is the PTT secured?

These are press fit.

Q: Can these grips be ordered with three PB switches?

The standard comes with only 1 pb switch. Please see the ultra for 3 switch options.

Q: Do this grips have a set screw, are the glued on, or what keeps them in place?

The grips do not include a set screw, a roll pin or a set screw can be used to attach the grip.

View in Catalog

View Image View in Catalog