EVERYTHING FOR AIRPLANES SINCE 1965 | 877-4-SPRUCE

Comant DME / Transponder Antenna CI-105-16

$215.95/Each
Quantity
Add to Wishlist
Part# 11-06819
MFR Model# CI-105-16

Overview

Frequency • 960-1220 MHz

Broadband and rugged antenna designed for DME or transponder use. The CI 105-16 was designed specifically for the Honeywell Bendix- King™ KA60.

This unit offers the extended length two-stud mounting found on the KA60.

Tested to the tougher DO-160D environmental requirements, this antenna offers the best in ruggedness and performance.

Note: Comant Antennas no long come with a gasket or a template. Must order PN 09-05579 separately.

   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Specifications

MODEL CI 105-16 DME/ TRANSPONDER
Electrical
Frequency

960 to 1220 MHz

VSWR

1.5:1 960 to 1220 MHz
1.3:1 1030 to 1090 MHz

Polarization

Vertical

Radiation Pattern
Equivalent to 1/4 Stub
Impedance RF
50 Ohms
Resistance DC
Open Circut
Power RF
2.5 KW Peak
Mechanical
Weight
0.2 lb. Maximum
Height
3.23 in.
Material
Molded Radome
Finish
Unpainted White Valox Shell
Environmental
Temperature
-55ºC to +85ºC
Altitude
70,000ft.
Air Speed
400 Knots TAS at 25,000 ft.
Federal Specifications
RTCA Environmental
DO-160C
FAA TSO
C66b, C74c
  • Frequently Purchased With
  • Customers Also Viewed
  • Related Items

Reviews

Sergey N Verified Purchase

COMANT CI-105-16 DME XPDR ANTENNA BNC

June 2, 2023

Fit perfectly to replace the original king antenna on my aircraft.

Charles M Verified Purchase

COMANT CI-105-16 DME XPDR ANTENNA BNC

May 23, 2023

Easy to install, appears well made. Awaiting transponder recertification.

Steven M Verified Purchase

COMANT CI-105-16 DME XPDR ANTENNA BNC

March 31, 2023

Greg P Verified Purchase

COMANT CI-105-16 DME XPDR ANTENNA BNC

August 24, 2022

Varsha S Verified Purchase

COMANT CI-105-16 DME XPDR ANTENNA BNC

September 9, 2021

Don G
January 25, 2018

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does the Comant DME / Transponder CI-105-16 antenna come with an FAA 8130-3 form?

As the Comant DME / Transponder CI-105-16 antenna is a TSO'd product, this can be shipped with an 8130-3 form for an additional fee. Please include the request for this form with your customer sales representative or note the request in the special instructions page for an online order.

Q: What is the spacing for the studs on the COMANT DME / TRANSPONDER CI -105-16?

1.75 inches.

Q: Will this antena work with Apareo ESGi transponder?

Per the installation manual, the manufacturer recommends the AV-74.

Q: Will this Comant DME / XPDR CI-105-16 antenna work with the Garmin GDL 82 ADS-B kit?

The GDL 82 uses the existing transponder antenna with your current transponder. It the antenna must be replaced, the specifications for the transponder must be followed.

Q: How long are the mounting studs of the Comant CI-105-16?

Approx 0.70 inch.

Q: Can use the Comant CI-105-16 in Transponder KT 76A model?

Yes this will work.

Q: What BNC connector is required for this antennna?

Any BNC male would work with this antenna, but since this is certified you would use RG400 cable. The correct BNC for that cable is our part number 11-01802.

View in Catalog

View Image View in Catalog