Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
| Description | Quantity | Pot Life | Part Number | Price | Buy |
|---|---|---|---|---|---|
| PT2712 with Part B | 1 Gallon | 70 Minutes | 01-01587 | $209.95 | |
| PT2712 with Part B | 5 Gallons | 70 Minutes | 01-01590 | $625.00 | |
| PT2712 with Part B1 | 1 Gallon | 122 Minutes | 01-01588 | $194.85 | |
| PT2712 with Part B1 | 5 Gallons | 122 Minutes | 01-01591 | $565.50 | |
| PT2712 with Part B2 | 1 Gallon | 175 Minutes | 01-01589 | $196.75 | |
| PT2712 with Part B2 | 5 Gallons | 175 Minutes | 01-01592 | $700.00 | |
| PT2712 with Part B3 | 1 Gallon | 40 Minutes | 01-01593 | $198.85 | |
| PT2712 with Part B3 | 5 Gallons | 40 Minutes | 01-01594 | $617.00 |
- JUMP TO
- Overview
- Documents
- Reviews
- Q&A
- View in Catalog
Overview
| PT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300 centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Documents
- Technical Data Sheet (PDF)
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, that is correct. This will come with the B3 hardener which is a gel time of 3 hours.
