FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-4-SPRUCE

S4-2 Race Removal Tool

$202.95/Each
Quantity
Add to Wishlist
Part# 12-17602

Overview

The S4 magneto drive end inner race removal tool works in conjunction with a standard bearing puller. The split gripper ring fits behind and around the race and is captured in the puller ring by 2 opposing set screws. A groove on the puller ring provides the point of attachment for the puller arms.

Notes:
  • Review the Installation Drawing before installation.
  • Unit is non-returnable if instructions are not followed.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Installation Drawing

Reviews

There are precautions that are not included with this puller. Once placed into position, the tabs must be fully seated, by movement of the locking sleeve. This is a problem with bearings that have no spacer, where the bearing race is right up against the magnets. In this case, this tool does not have the ability to grip the race, and you will damage the tool. If the race has a gap, where the tabs lock in, and seat properly, this tool works great. This limitation needs to be noted.

Glen P
June 7, 2017

Dont waste your money on this tool. The screws securing the bushing sheared during its first use. I disassembled the tool, rotated the bushing, drilled/tapped new holes and installed hardened steel screws hoping to get at least one use out of this tool. On the second attempt, the teeth gripping the bearing broke off even though the sleeve was installed flush with the end of the tool as the instructions suggest. Just a waste of time and money, especially without the option to return for refund.

Sam
June 4, 2018

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog