The Valve Wobble Test Fixture for parallel valve Lycoming engines is used to comply with Lycoming SB388a. Quality made of aluminum and alloy steel, it is easy to use with no set screws or feeler gauges required. Allows direct reading of wobble from dial indicator.
Note: Will work on a angle valve engines as well.
Dear all, If it possible, please provide me information about the next item: 12-21505 VALVE WOBBLE TEST FIXTURE (INDICATOR). I need to know the accuracy of this device. If it possible please send me the User Guide, Manual or any other document that reflects the metrological characteristics for this device. Thank you in advance!
The fixture itself is ok. Attaches with only one screw on angle valve cylinders, but good enough. The valve extension is included and makes this worth buying. Do not buy the gauge however. The one I received was defective, and took months to get a replacement. Meanwhile I purchased one for less than half the cost elsewhere, and it was better quality.
The note is correct. This tool is good for parallel valve and angle valve engines.
Per supplier: It depends on the position of the mounting lug and whether or not the lug is plastic or steel. The indicator is clamped by the lug on back of the indicator, so if it's a plastic lug, that could present a problem. It the orientation is wrong and the lug/backing plate can be rotated to the correct position, that can resolve one issue.
Per the supplier: Yes, it comes with the adapter that attaches to the valve stem.