1-877-4-SPRUCE | firstname.lastname@example.org
Aircraft Spruce & Specialty Co.
Corona, CA | Chicago, IL
Wasilla, AK | Peachtree City, GA
Brantford, ON Canada
FREE SHIPPING ON ORDERS OVER $350 VIA UPS GROUND | 877-4-SPRUCE
MITCHELL CHT SENDERS
$9.85 to $25.50
MITCHELL CHT SENDER 18MM - J
MITCHELL CHT SENDER 14MM - J
MITCHELL 10 CHT LEAD
These electric instruments are lighted, allow easy installation, & feature a 2 year factory warranty. Order gauges and senders separately as shown. 12V operation unless other wise noted. Gauges fit 2-1/4" panel hole.
For use with Mitchell D1-211-5102.
Customers Also Viewed Frequently Purchased With
Q: On the Mitchell CHT gauges, how long is the 14mm sender (10-25080) and what is the CHT lead (10-25185) used for?
On part number 10-25080 (14mm sender) it is a 1 foot lead where 10-25185 is a 10 foot extension.
Q: Can the end of the probe be replaced with a different ring terminal, or does that affect the accuracy of the gauge? Also, does shortening the lead affect the accuracy?
Per the manufacturer, as long as the ring terminal is the correct millimeter size for the spark plug, it should be fine. Also per the manufacturer, shortening the lead will not affect accuracy.
Q: Are the green / red range markings customizable upon ordering?
Range marks are included at no charge if vendor receives the range mark data at the time of order. These are hand marked directly on the dial, not the glass.
Q: What extension wire is recommended for use with the 18mm sender (part # 10-25075)?
The 10' extension wire is part number 10-25185.
Q: Can the Mitchell D1-211-5102 CHT gauge be used with an Alcor 86251 Probe?
Yes, Alcor probe 86251 will work with the Mitchell D1-211-5102 CHT Gauge.