Tools - Oil Filter Tools |
|
|
1
| 2
Next >
|
|
 |
AVIATION OIL FILTER CUTTERThis aviation oil filter cutter will open any size oil filter canisters for your inspection. To use the tool, place the filter in a vice, attach the tool to the top of the filter, & rotate 4 to 6 turns to open the canister. Cutting wheel will stay sharp for about 50 uses, and is easily replaced when dull.The tool is made from 6061 aluminum anodized finish. The tool is ready to use on any oil filter with a male or female thread. Click here to view more details. |
| 12-21395 | OIL FILTER CUTTER KRC-1203 | $59.85 | 
| |
|
 |
OIL FILTER CUTTEREasily cut through those tough oil filter housings with the Oil Filter Cutter. This easy-to-use Oil Filter Cutter accepts both male and female styles of aircraft oil filters, and many automotive sizes. Simply place the filter flat on the cutter body, tighten the black knob to push the cutter wheel into the filter, and several turns will have you through the filter housing. Click here to view more details. |
| 13-03145 | OIL FILTER CUTTER #7000 | $119.95 |
| |
|
|
 |
OIL FILTER DRAIN TOOLThis oil filter drain tool permits draining spin-on oil filter prior to removal from the engine. Just clamp on to rear of filter with cutter, punch small air bleed at the top of the housing with an ice pick, remove cutter and oil will drain freely in-can or hose-extended funnel. Click here to view more details. |
| 08-04200 | OIL FILTER DRAIN TOOL | $43.60 |
| |
|
 |
ACS OIL CAN CUTTERThis unit has the capacity of both P/N AFC-470 & 12-21395. It also uses the same replacement blade as the 12-21395. Anodized -Red- for corrosion resistance. Base can be clamped in a bench vise if desired. Click here to view more details. |
| 12-01048 | ACS OIL CAN CUTTER 17040 | $59.85 |
| |
|
 |
OIL FILTER DRAINER remote mounted filter installation can easily hold a quart of oil in the filter and lines after the engine is drained. This oil will come pouring out when the filter is removed, making a mess in the engine compartment. Cleaning up this mess often takes longer than the actual oil change. Click here to view more details. |
| 13-03147 | OIL DRAINER #7300 | $94.50 |
| |
|
 |
TEMPEST OIL FILTER CAN CUTTERThis universal cutter from Tempest is easy to use and is a great addition to any toolbox. It's made from high quality aircraft aluminum, making it lightweight and very durable. Works on all aircraft spin-on oil filters. Adapter pin easily removed for 'male' filters. Click here to view more details. |
| 12-01392 | TEMPEST OIL FILTER CAN CUTTER | $89.90 |
| | 12-01393 | TEMPEST OIL CAN CUTTER BLADES | $9.75 |
| |
|
 |
TEMPEST AA473 OIL DRAIN TOOLTired of messy oil filter changes? Tempest oil drain tool with a twist of the knob drills a hole in the filter and allows the oil to drain out of the filter into your container. No mess, easy to do and inexpensive. Click here to view more details. |
| 12-02248 | TEMPEST AA473 OIL DRAIN TOOL | $23.50 |
| |
|
|
|
|
|
|
|
|
 |
OIL EASY WRENCHThe Oil Easy Wrench is specifically designed to remove the oil filter on any aircraft using the Teledyne Continental IO-520 or IO-550 engine. In fact, it is a universal oil filter wrench that works great on any piston engine airplane! Click here to view more details. |
| 12-01552 | OIL EASY WRENCH | $39.95 |
| |
|
|
 |
TOMS OIL FILTER CUTTING TOOLTom' s oil filter cutting tool will allow you to inspect your filters in an efficient manner. Most filter cutters work like a pipe or tubing cutter in that you have to go around and around the filter, adjusting cutter depth with each pass. Click here to view more details. |
| 12-01697 | TOMS OIL FILTER CUTTING TOOL | $59.95 |
| |
|
 |
OIL FILTER KNOBEasily unscrew that slippery oil filter, even in tight places, with the oil filter knob. The large diameter knob slips onto the hex of an aircraft oil filter for a strong grip even with oily hands. Allows many filters to be installed and removed without using a wrench. Click here to view more details. |
| 13-03146 | OIL FILTER KNOB #7100 | $42.75 |
| |
|
 |
OIL FILTER WRENCHThe 1 inch hexes of the wrench easily fit Champion oil filters. The hexes are rotated 15 degrees from each other so by turning the wrench over or flipping it end-for-end you can easily find an orientation that allows you to get on the filter, even the tightest engine compartment. It's 6 inch Click here to view more details. |
| 12-01638 | DEAL OIL FLTR WRNCH 7150 | $13.75 |
| |
|
|
|
 |
REPLACEMENT BLADE
OIL CAN CUTTERGeneral Tool’s Gold Standard Cutting Wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts. The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion. The RW122 is designed for larger capacity cutters on iron pipe and other tough surfaces. Click here to view more details. |
| 12-01159 | OIL CAN CTTR REPLACEMENT BLADE | $6.50 |
| |
|
 |
PRECISION OILEROur Precision Oiler is a highly accurate lubrication tool intended for anyone working with small mechanical parts. The needlepoint tip allows for the precise placement of oil in confined areas. The smooth thumb actuator lets you control the release of lubricant from the reservoir in small droplets. Click here to view more details. |
| 12-01894 | OILER PEN 589 | $9.75 |
| |
|
|
1
| 2
Next >
|
|
