The DUAL-COM II Intercom is a portable two-place unit designed for two-place aircraft and developed for high noise environments. This intercom has two separate volume controls which can be adjusted by either the pilot or passenger to meet individual hearing levels and integrates directly with all Comtronics headsets and helmets providing ar-to-air and air-to-ground communication.
It also has a toggle switch for Radio 1 and Radio 2. This switch allows pilots the option to transmit from either of two separate transceivers while monitoring both simultaneously. Since there are two isolated radio ports for use with two different hand-held radios, pilots can contact the ground crew on one transceiver while notifying a nearby airport on the other. All of this can be accomplished by using the switching circuitry provided.
Radio selection is controlled by one toggle switch located on front surface of box. Radio actuation is controlled by a single push-to-talk switch which may be mounted on the aircraft control stick.
This circuitry has also been designed with an automatic internal noise canceling feature which eliminates the bothersome "tweaking" to adjust background noise. Also included in the DUAL-COM II is a unique side-tone circuit that allows the user to hear his or her own voice assuring proper operation.
The aircraft-grade enclosure virtually eliminates all stray radio interference. Provisions for both a 9-volt battery and external power port are included. The power cord comes with a secure lock-ring and can either be stripped and tinned or terminated with a cigarette lighter plug.
A DUAL-COM II style interface cable is available for connection to Aircraft Radios, Motorola Radios, Marine Band Radios, 2-Meter Radios, FRS Radios, CB Radios, AM/FM Radios, Cell Phone Port, Music Port, iPod, iPhone, MP3 Players and Camcorders.
There are two slide switches mounted on the circuit board next to the battery. These enable a pilot to mix and match microphones. One switch can be placed in the "E" position for Electret Microphones and the other switch can be placed in the "D" position for Dynamic Microphones.
This intercom can also be panel-mounted using a DUAL-COM II FacePlate.
A DUAL-PAQ II Intercom Holder can also be added. This is a sturdy enclosure for shock-mounting intercom to airframe. Construction is a heavy-duty vinyl with hook-and-loop webbing. This DUAL-PAQ II is very well made and does an outstanding job!
Another excellent feature from Comtronics is an In-Line Passenger Push-To-Talk Switch. This switch shuts off the passenger's microphone so that 50% of the noise is gone! Just press the push-to-talk button to speak. The cable is portable and can be moved from plane to plane.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, this intercom is designed to accept single ultralight style plugs that the Comtronics helmets are outfitted with. For dual GA applications, we recommend the Skycom, Flightcom, Pilot USA, Nav Data, Sigtronics or PS Engineering portable intercoms.
These are not aircraft specific, however they do use a specific headset that has the compatible jacks.
Yes, however it requires an adapter cable to be able to interface. You can view 11-15896 for a possible choice.