Overview

The self-contained TA102 Dual USB Charging Port is a modern addition to any cockpit and interior cabin. Each USB port is designed to supply the electric current needed to charge any standard or high-power device with a USB interface. Cell Phones Tablets GPS devices The TA102 protects itself and the charging device from short-circuit, power surges and over-current potential. Application: Intended for Cock-pit & Cabin for most GA aircraft up to Boeing 777

Features

• Output Power: 2.1 amps per port
• Input Voltage: 10 – 32 VDC
• Output Voltage: 5 VDC ± 0.25 per port
• Charge one or two products simultaneously with a USB interface
• Short-circuit, over-current, and over-temperature protection
• Panel or cabin mount

Specifications

• Input Voltage: 10 – 32 VDC
• Input Current: 24 W max; 1.7 amps at 14 VDC 0.85 amps at 28 VDC
• Output Voltage: 5 VDC ± 0.25 per port
• Output Power: 2.1 amps per port
• Weight: 0.2 lbs
• Dimensions: 1.5” W x 1.5” H x 0.96” D
• Charging Port Type: USB Standard-A
• Mating Connector Kit: MCI P/N 9017960
• Mounting: Panel or cabin; front or rear mount; Instrument mount kit (MCI P/N 9017947); Front mount kit (MCI P/N 9017946)
• Certification: FAA TSO-C71 certified; RTCA DO-160G qualified

Warranty

LIMITED LIFETIME WARRANTYThis limited lifetime warranty is extended by True Blue Power, a division of Mid-Continent Instrument Co., Inc. to all ultimate and direct purchasers of specific True Blue Power products covered herein.

True Blue Power warrants specific products manufactured by Mid-Continent Instrument Co., Inc. to be free from defects in material and workmanship when installed and used under recommended conditions and to perform according to the requirements of their individual specifications. This limited lifetime warranty applies ONLY to the original installation and non-commercial applications (Part 121 & 125, and is effective only after product registration card has been completed within 45 days of purchase.

The following situations will not be covered under this limited warranty:

• Any defect, malfunction, breakage, or failure caused by unreasonable use or abuse while in the possession of a buyer.
• Any defect, malfunction, breakage, or failure caused by mis-wiring at installation by the customer or his/her agent.
• No product will be eligible for warranty consideration if, subsequent to its delivery, an alteration or modification becomes necessary for product improvement or in order to meet a change in the requirements of any applicable federal regulation.
• Cosmetic damage, including but not limited to scratches, dents and broken plastic on ports

If any listed True Blue Power component fails within the duration of the express warranty, the entire extent of the Mid-Continent Instrument Co., Inc. liability under this warranty is limited to repair or replacement, at True Blue Power’s option. Eligible products shall be returned directly to True Blue Power, properly packaged and postage prepaid.

Examination must disclose a valid warranty condition to the satisfaction of True Blue Power.

In no event will seller be liable for any incidental damages, consequential damages, special damages, indirect damages, loss of profits, loss of revenues, or loss of use, even if informed of the possibility of such damages. Seller’s liability for damages arising out of, or correlating to a product or an order, is limited to the lesser of catalog or contract price for the specific product that gives rise to the claim. To the extent permitted by applicable law, these limitations and exclusions will apply regardless of whether liability arises from breach of contract, warranty, tort (including but not limited to negligence), by operation or law, or otherwise.

Printable Warranty (PDF)

Documents

• Installation Manual
• Technical Drawing
• Brochure