Limit One Per CustomerWith its highly reliable drive mechanism, the Honeywell 85000 Series features an odometer gear train and accurate quartz crystal timing to provide enhanced performance. An improved odometer gear train, plus snap-together chassis, fits into a shock-proof, totally sealed case often resistant to many acids and solvents. All parts are in-process inspected. Every meter must pass a 100% function, burn-in, and timing accuracy test before shipping.
All went well no problems
This is an actual rolling counter meter so there is no problem reading it from different angles or in direct sunlight. It works just as it is desgned to do. I am of the opinion that this is a very good choice when selecting an hourmeter.
This Hour Meter was easy enuff to mount on my 172N panel to replace a broken one of a different make. Hopefully it lasts forever. Its relatively cheap considering its a panel mounted gizmo. It would seem most things that screw into a panel are well over a 100 dollar minimum.
Quick shipping, looks good and works properly.
Works great and fast shipping.
Fast delivery. It appears to be a solid piece of equipment. Will be hooking it up soon.
This hour meter fits in an opening 0.9 x 1.41. Mounting screws are 1.75 apart. There are 2 electrical attachment points on the back, power and ground. Both are brass tabs that take a solder connection or 1/4 fast-on connector.
Great to do business with
Per the manufacturer, this Hobbs Meter (part number 15000) cannot be preset.
Per the manual in the box you can wire to the ignition switch or a pressure switch to activate.
The Honeywell hobbs hour meter can connect to the ignition switch or a pressure switch. If connected to a pressure switch, once there is a rise in oil pressure, the hobbs will track time.
Yes, the Honeywell hobbs meter (15000) comes with mounting hardware and 18" wire leads.
The Honeywell hobbs meter (15000) draws 75 milliamps.
It is sealed from dirt and moisture but it is not recommended to be submersed.
Approx 0.14 lbs.
2.12" LENGTH OF FACEPLATE
1.26" WIDTH OF FACEPLATE
The unit itself does not have FAA Approval, however Hobbs meters are OEM on many production aircraft. Please check your aircraft parts manual and with your local aviation authority for confirmation on whether this unit can be legally installed in your aircraft.
The Hobbs meter draws 75 milliamps.