The Aithre Shield EX 1.0 is the first behind-the-panel-mounted analog output carbon monoxide detector for experimental aircraft and is compatible with Dynon SkyView, Garmin G3X and Advanced Flight Systems. It puts CO monitoring directly on your avionics screen as an engine gauge! Besides being extremely small, light, and easy to install, the EX 1.0 is sensitive and responsive at the lowest levels of CO gas between 0 and 255 ppm to detect and manage CO before it becomes an emergency. With no recalibration requirement for 10 years, you’ll enjoy many years of safe flying with the Aithre Shield EX 1.0.
Simple Installation: Just three wires - power, ground, and analog output
Sensitive: Under 30 second sensor response between 0 - 255 ppm with 1 ppm resolution
Compact: Measures just 1.97" x 1.97" x 0.64" (mounting flange adds 0.75" to the base width) and weighs only 1.1 ounces
Intuitive Graphical Indication: This device is compatible with Garmin G3X, Dynon Skyview and Advanced Flight Systems and outputs as a moving bar (G3X) or a graphical dial (Dynon) or readout with popup notificatication (Advanced)
Temperature Independent: Internal temperature adjustment circuit that compensates for temperature induced errors in the sensor between -10 C to +50 C
No Recalibration: State-of-the-art sensor requires no recalibration for 10 years under normal operating conditions
Pressure & Altitude Independent: The detector is not affected by pressure and altitude changes
Note: This device is NOT compatible with the Aithre Connect iOS application
Hand Calibrated: Every Aithre detector is individually calibrated using high precision calibration CO gas and comes with a signed certificate of calibration
Dimensions: 1.97" x 1.97" x 0.64"
Mounting flange adds 0.75" to the base width and weighs only 1.1 ounces