• Wishlists
  • 877-477-7823
  • Contact Us
 
 
FREE SHIPPING ON ORDERS OVER $350 VIA UPS GROUND | 877-4-SPRUCE

GUARDIAN SMARTLINK 555 FLIGHT DATA RECORDER CO DETECTOR

$859.95/Each
Quantity
Add to Wishlist
Part# 13-20702
MFR Model# SMT555-101

Overview

The smartLink 555 is a Flight Data Recorder, Pulse Oximeter, CO Detector, and AHRS that works with the Guardian Avionics smartPlane system. This unit is panel mounted in a small position to provide convenient access to the Pulse Oximeter in-flight. The smartLink 555 communicates with the smartMFD iOS app via Bluetooth connection.

Start with the CO Poisoning Prevention that Guardian Avionics is Known For.
The smartLink 555 is built around the reliable and accurate Carbon Monoxide detection technology that Guardian Avionics and CO Guardian has been known for. The sensitive onboard CO sensor alarms an initial warning when CO levels measure greater than 50 parts-per-million (PPM) up to 99 PPM. A persistent warning will trigger when levels climb above 99 PPM immediately when detected.

Prevent Hypoxia with Built-in Pulse Oximeter.
The smartLink 555 allows the pilot and crew the ability to measure blood oxygen levels (O2 saturation) and pulse in-flight from the convenient panel-mounted pulse oximeter. For pilots flying at higher altitudes regularly, the smartLink 555 is a convenient option to help prevent hypoxia.

Avoidance of hypoxia at higher altitudes is important to pilots – lower blood oxygen levels could result in physical impairment, unconsciousness, and even death if not accurately monitored. Even while using supplemental oxygen, measurement of blood oxygen levels is important to assure the effectiveness of O2. The highly sensitive built-in pulse oximeter in the smartLink 555 measures the blood oxygen level and pulse (heart rate) of the pilot or crew member when the index finger is inserted into the unit. Measurement takes only seconds and will display on the smartMFD iOS app and select 3rd party avionics products.

Your GPS, Engine Monitor, and Attitude Connect & Display on Your iPad & iPhone.
The smartLink 555 can be connected to your onboard GPS and Engine Monitor via RS-232, allowing accurate navigation and engine performance data to be aggregated, transmitted, displayed, and recorded on your iPad and/or iPhone through the Guardian Avionics smartMFD app via a Bluetooth connection. The smartLink 555 also has a built-in AHRS (Attitude and Heading Reference System) for VFR use that will prove attitude data to the iOS. As a result, your iPad and iPhone become mini-multifunction displays -- fully equipped with accurate VFR and IFR maps and charts, rich graphical engine performance information, and even a mini-PFD/MFD for quick reference. All Carbon Monoxide alerts and levels are also available on the smartMFD app too!

All Your Flight Data is Sent and Stored in the smartData Web App for You.
Through the smartMFD app, all of your flight data is stored and uploaded to your account on the Guardian Avionics smartData web app via 3G/4G/LTE or WiFi at the end of every flight, with the ability to download and view flight tracks on programs like Google Earth, view engine data through rich charts and graphs, and even export your data for use through other programs or to send to others. If your iPad or iPhone is connected to your audio panel through a 3.5 mm audio jack, the app will even record the audio from your intercom and upload it to your account for each flight too!

How can you use the data? See how accurate your recent practice approaches were on a recent flight. Send trend data to your A&P or engine manufacturer to troubleshoot an issue. Evaluate all aspects of a recent training flight, including radio procedures.

How can you use the data? See how accurate your recent practice approaches were on a recent flight. Send trend data to your A&P or engine manufacturer to troubleshoot an issue. Evaluate all aspects of a recent training flight, including radio procedures.

Budget and Panel Space Friendly.
Equipping the smartLink 555 is like bundling multiple pieces of equipment into one compact, panel mounted unit. In the past you’d need to buy and install a CO detector, Pulse Oximeter, GPS signal booster, and backup AHRS for your iPad/iPhone as separate items – and flight data recording on an app for both navigation and engine data was not even available! Now you can get all of that in one small, easy to install package for one reasonable price!

Specifications

Pulse Oximeter, Carbon Monoxide Detector and Pressure Sensor:
  • Built in carbon monoxide (CO) detector will display above 10 ppm. CO above 50 ppm will trigger an alarm mode within five minutes or less.
  • Dimensions (approximate - inches): 2.95"L x 2.50"W x 2.50"H
  • Weight 8 oz.
  • DC power 14 or 28 Volts
  • Temperature range: -20°C to 70°C
  • Internal fan for optimum CO sensing
  • Tone generator for headsets
  • Bluetooth capability
Pressure Sensor:
  • Built-in Pressure Sensor provides cabin pressure altitude warnings at 10K, 12.5K and 14K feet
  • Reminder to check SPO2 periodically based on cabin altitude
  • Pressure sensor tested up to 25,000 feet
RS-232 Output:
  • CO Level
  • Heart Rate
  • Cabin Temperature
  • Cabin Pressure
  • SPO2 Blood Oxygen Level
Bluetooth®
  • Supports the Nonin 9560 (www.nonin.com) through a Bluetooth®connection.
  • Once a connection is established with the Aero 455, a pilot can remotely monitor a passenger with a Nonin pulse oximeter on a G1000 screen.
Carbon Monoxide Detector / Pulse Oximeter Display Information:
  • Optional Aero 55 will function as a display for the 455-101-001
  • Garmin G3X, Garmin G3X Touch, G900 and G1000 display CO levels, heart rate, and SPO2 levels. GNS 480 displays CO levels only.
  • JPI EDM 730, EDM 830, EDM 900 Primary, EDM 900 Experimental, and EDM 960 Twin display CO levels, heart rate, and SPO2 levels.
  • Electronic Instruments MVP-50P, MVP-50T, and CGR-30P display CO levels. Please contact Electronic Instruments for Pulse Oximeter programming options.
  • Grand Rapids Technologies Sport Series, Horizon HX, and HXr EFIS Systems display CO levels, heart rate, and SPO2 levels.
  • Please check with your manufacturer for details as to which units will display CO, heart rate, and SPO2 levels.
JPI 830 demo unit above courtesy of JPI. JPI 830 not included.

Reviews

Q&A

View in Catalog

View Image View in Catalog