SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM | 877-4-SPRUCE

ACS Custom Throttle / Mixture / Prop Controls

This line of controls was manufactured by us from 1980 to 1985. As of June, 1985 the controls have been manufactured by ACS Products Company in Lake Havasu City, Arizona. The manufacturing and inspection procedures have been approved by the FAA and original equipment manufacturers. The following engineering data will aid in properly identifying the control most suited to each individual requirement. Also shown are some available options for the controls such as plastic protective covering and steel sleeves for clamping the control to the aircraft structure.

Important Notes: Custom length controls are not FAA Approved and are intended for use in experimental aircraft only. The only ACS controls that are FAA Approved are part #'s A-790-12 and A-800-12. RV builders / owners should not use the customer control order form. Instead see the RV specific cables under part #05-01436 and 05-01435.

BUILD YOUR CUSTOM CONTROL

Locking
Cable End
Knob/Handle/Button
Color
Length

How to measure Vernier / Friction / Button / Glide / Ratchet / Positive Cable

How to measure Push-Pull Cable

Images are for measurement reference only. Depictions of knobs or mechanisms are not standard and must be selected in the order form.
Options: Add Plastic Covering
Add Steel Sleeve
Add Unthreaded Swaged Steel Sleeve
Add Threaded Swaged Steel Sleeve

(measurement taken from under the panel nut to mid-point of sleeve)
Add 7/16-20 bulkhead fitting to 10-32 rod end
Add Coiled End (Solid Wire Cables Only)
PN
Qty
Price

ENGINEERING DATA

Control Model No. Control Type Stroke at 0 Routing Decrease in Stroke per 360 degree of Bend
A-700 Button Lock (Wire End) 3.37"* 0.50"
A-730 Glide Free (Wire End) 3.37"* 0.50"
A-740 Ratchet (Wire End) 3.37"* 0.50"
A-750 Vernier (10-32) 3.37"* 0.35"
A-790 Vernier (Wire End) 3.37"* 0.35"
A-800 Friction Lock (10-32) 3.37"* 0.35"
A-810 Friction Lock (1/4-28) 3.37"* 0.35"
A-920 Push-Pull (10-32) 3.37" 0.35"
A-930 Push-Pull (1/4-28) 3.50" 0.35"
A-970 Vernier (1/4-28) 3.37"* 0.35"
A-1550 Push-Pull (10-32) with Bulkhead Fittings 3.37" 0.35"
*Length of exposed wire. **Recommended minimum bending radius for all controls is 5" (never less than 3")


ORDERING NOTES



PLASTIC COVERING ON CONTROL CASING
All ACS controls can be supplied with a black Polyolefin (PO) protective cover. Price of the PO cover carries a base price plus per foot price.

STEEL SLEEVES ON CONTROL CASING
Cadmium plated 2" long steel sleeves can be added to the casing to provide clamping points for securing the control to the aircraft structure. Specify sleeve location (measurement taken from under the panel nut to mid-point of sleeve). Sleeves are normally swaged to the casing but will be left unswaged when swaged box is unchecked above.

THREADED STEEL SLEEVES ON CONTROL CASING
Threaded steel sleeves (bulkhead fittings) can be added to the casing to provide secure clamping of the control where it passes through a bulkhead. The cadmium plated sleeves are 2" long, with 1-1/2" length of 7/16-20 threads. Specify sleeve location (measurement taken from under the panel nut to mid-point of sleeve). Sleeves are normally swaged to the casing but will be left unswaged when unchecked above.