EVERYTHING FOR PLANES AND PILOTS SINCE 1965 | 877-4-SPRUCE

PTI PRG URETHANE & EPOXY REMOVER - AIRCRAFT PAINT REMOVER

Select Size:
Quart Gallon 5 Gallon 55 Gallon Drum
Quantity
Add to Wishlist

Overview

PTI Paint Remover Green is a non-flammable fast acting paint remover that is formulated to easily lift most aircraft, automotive and marine coatings. Due to its powerful and fast acting characteristics this remover is able to lift multiple layers with one application in minutes. Wash away action with water forms a foamy emulsion that gets cracks, seems, moldings and crevices clean. Paint Remover Green is very thick /viscous giving the product excellent clinging ability to horizontal and vertical surfaces. This product is considered hazardous under OSHA Regulations.

Certification paperwork must be requested at time of order. If certs are required with purchase, please contact us by clicking here or calling sales.

PTI-PRG removes Urethanes, Epoxies, Lacquers, Enamels, Vinyl, Latex, Varnishes, Acrylics, Shellac, polyesters and most other high performance finishes.

Properties & Characteristics

  • Mil-thickness: 2 – 4 mils
  • Flash Point: None to Boiling
  • DOT Hazard Class: Class 8 Corrosive
  • Viscosity: Thick
  • Weight per Gallon: 12.34 lbs.
  • Coverage: 25- 50 sq/ft per gallon
  • VOC: 151.42 grams per liter
  • Approved Surfaces: Metal, Concrete and Wood

Documents

Reviews

great product, does the job

Carter
July 8, 2020

The best paint stripper on the market today

John Z
April 5, 2020

Very GOOD stripper !!! Along with a lot of other things available through A/C Spruce !! Been doing business with you for years ! Thanks, Russ

Russ H
January 13, 2020

Tried this as opposed to the parts store stuff for cleaning paint off European alloy wheels, works very well.

Erik
September 19, 2019

Came quicker than expected which is great!

Ella C
November 6, 2017

This product is a great professional level stripper. It has the same quirks as any other paint stripper, it works best in warmer temperatures, the instruction sheet suggests placing polyethylene or some other plastic over the wet product and that does help a good bit, especially when temperatures are very high and the product dries fast. I’ve used hundreds of gallons of stripper on aircraft and this stuff works as good as any other when applied liberally and in the right temp range. Water neutralizes the product if it makes contact with skin which should be avoided, as well as the parts for cleanup.

Rusty
July 22, 2019

Works great on paint that is almost gone due to age but on the newer paints it is truly pitiful. I had some green epoxy primer on my parts and it barely took the gloss of it. I sanded the part and tried again 0 success . I would not recommend this remover for any reason

Henry P
August 25, 2017

The EPA is the real culprit, but this product is barely usable. On a left hand elevator for a C-210, I am on my 9th coat, and have about 80% of the paint removed, and have used almost all, 1 gallon. It would take about 100 gallons to do the entire plane, and hundreds of hours as the user must scrape each rivet. It is bad enough, where if possible, I would as for a refund.

Glen P
August 26, 2017

Q&A

Q: Can the PTI PRG Urethane and Epoxy remover be used on fiberglass (RR6 cowling)?

Per Vendor: Yes this can be used on fiberglass.

Q: Will this damage ceconite fabric?

Paint stripper/remover is not recommended on fabric.