|Rotax®/Bing 36mm||2||2||5-3/8||Round Straight||RC-2440|
|Mikuni 32mm||2-1/4||4||3-1/2||Round Straight||RU-0600|
|Mikuni 34mm||2-1/2||4||3-1/2||Round Straight||RU-0800|
|Kawasaki/Mikuni 32mm||2-3/4||3||5||Round Straight||RC-0930|
|Rotax®/Bing 36mm||2-1/16||4||3||Round Straight||RC-1350|
|Rotax® 503/532 Aerobatic carb||3-1/2||4-1/2||3-1/2||Tapered||RU-2790|
|Rotax® 912 Offset||2||2||5-7/8||Round offset||RA-045V|
|Rotax® 914 Rd. Center||2-7/16||5||3-1/2||Round Centered||RU-0810|
|Rotax®/Bing 36mm||2-1/16||3||3||Round Straight||RC-1890|
|Rotax®/Bing 36mm||2-1/16||3||3-1/2||Round Straight||RC-1150|
K&N Filters are the standard in excellence. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and provide secure attachment. These flanges can be stretched up to 1/8" (3mm) to fit in-between sizes. K&N Universal air filters are available in round, tapered, and oval designs, to fit just about any application. Use the dimensioned sketch and the selection chart to find the filter best suited to your application.
RU0800 K&N STRAIGHT AIR FILTER
Solidly built. Has a chrome cover that isnt relevant for aircraft use but I left it on in case it was structural. The filter does NOT have a grommet for a safety wire like the corresponding Rotax part. Im not sure how strong it is to drill into the rubber around the filter edge.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
P/N 08-04979 is one oval air filter with two rubber inlets built in, to attach each carb.
This was a mistake on the web page. It has since been corrected. The only throat size that is listed now is 2-1/2. Yes, it should work fine for you.
Yes, we do. We sell it under our part number 08-12163. A keyword search for this part number will bring you directly to the product page to order.
For a Rotax 503, the RC2720 is what you need. Keep in mind that the RC2720 does not include the safety wire tabs that should be used. I would strongly recommend you use Rotax part number 825-721, which is available from California Power Systems at www.cps-parts.com.