SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM | 877-4-SPRUCE
Thumbs 1
Thumbs 1
Thumbs 1

POWERUP KA14033E IGNITION HARNESS W/ELBOW RED

$677.00/Each
Part# 08-01199
ModelBendixSlick4
CYL
6
CYL
ElbowStraightPN
KA14033Ex--x--x--08-01199

Overview

UNIQUE SPRING DESIGN:
PowerUp ircraft engine ignition harnesses incorporate a negative-pitch spring design (the tip of the coil spring extends inward) allowing the coil spring tip to lie flat against the spark plug electrode, providing 360 contact. Ignition energy is maximized and flashover is reduced to a minimum.

REPLACEABLE CONTACT SPRINGS:
Replacement springs are available separately saving you time and money when a field repair is necessary.

PLATED STEEL NUT:
Steel nuts offer superior strength compared to aluminum nuts and reduce the potential for galling during installation.

PERFORMANCE PLUS:
Using a tinned-copper, nickel plated braid shielding substantially reduces EMI and combined with a very flexible 19 strand conductor of stainless steel wire provides the ultimate in wire conductivity and ease of installation.

STRAIGHT & 90 DEGREE STEEL ELBOW LEADS AVAILABLE:
Steel nuts offer superior strength compared to aluminum nuts and reduce the potential for galling during installation.

ABRASION AND HEAT RESISTANT:
The abrasion resistant red polymer cover has been engineered specifically for the high-temperature environment of reciprocating engines.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Features

  • FAA/PMA APPROVED FOR:
  • Continental Motors
  • Textron Lycoming
  • Customers Also Viewed
  • Related Items

Reviews

Very high quality - better than the competition. Go with Kelly - while they only sell through distributors, their customer service cant be beat!

Heather P
April 28, 2022

I firstly purchased a no-name generic harness for my IO-360 C1E6 however, the leads were really just too short for my install and the ends were not marked. I reluctantly purchased this Kelly set (out of frustration), but now that the harnesses are installed, Im really wishing I would have started with the Kelly set. Quality looks to be very good, the ends are marked for correct install / hook-up, and theres plenty of lead length to work with. Apparently, the C1E6 has a different connection pattern than other 4 cylinder Lycomings. I havent had opportunity to start the engine yet, but I have high confidence in the Kelly harness, and Tempest plugs.

Steve C
May 24, 2021

Harness received as expected, and worked well.

Bob C
May 12, 2021

Install went good. Works fine. From what I have seen of it prior to installation, it looks as good as those costing quite a bit more. I’m sure it will last a long time

John P
April 22, 2021

as advertised

Naiara
February 16, 2021

always in stock. good value for what else is available.

Central A
September 2, 2020

Absolutely as advertised. As each lead was numbered, no chance to mess up and the cap fit perfectly into my Slick mags. Included in the kit was everything we needed. Aircraft starts and runs much better.

Rob F
August 31, 2020

What a awesome setup Very nice Huge improvement Thanks

Brad
August 5, 2020

Called your sales number and wasnt sure which harness I needed. I connected with your salesperson, Tangie. I found her to be extremely Knowledgeable and very helpful as well. I think the company should be made aware of her professionalism.

Bud B
June 15, 2020

A better quality harness than the original Champion Slick harness. I also received excellent help from Kelley Aerospace on determining their part number for the harness kit as it was not listed in their application chart for my Lycoming model.

Ted
May 23, 2020

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are these Kelly Aerospace harnesses for one mag or both?

These harnesses are for both left and right magnetos.

Q: Are these Kelly Aerospace harnesses for one mag or both?

These harnesses are for both left and right magnetos.

Q: KA12365 harness. Is that a complete harness kit containing 8 leads, 4 on each cap?

Yes, this is a complete set so it will come with the left and the right harness.

Q: Is the Kelly KA12015 harness for both mags or I have to buy 2?

This harness is complete for the left and right mags.

Q: Are these Kelly ignition harnesses shielded?

Yes they are shielded.

Q: Do these harnesses, specifically the KA12007, come with leads and cap? or just leads?

This will come with Leads and Cap.

Q: Whats all in the box? Do these harness come with all the required mounting clamps and hardware?

Clamps, hardware and zip ties are included.

Q: For the KA12007 harness do I need to buy one for each magneto, total of two? Or does the price include harness for two mags?

These are priced and sold as a set of two mags.

Q: Do the Kelly KA12772 leads come with the cap for the back of the magneto?

Yes, it comes with the cap.

Q: What is the difference between the Red and Blue harness?

Functionally they are the same. Only difference is color.

View in Catalog

View Image View in Catalog