Part# 09-00982
MFR Model# 069.000A150.076


IMPORTANT: Spray test panel before applying to your actual surface. Most cans present no issue but please contact customer service if your can nozzle is defective.

All Tempo spray products feature the exclusive adjustable Fanspray valve which offers a professional spray pattern so anyone can "paint like a pro". The extra-width pattern evenly coats about 3 times the area with each pass compared with an ordinary spray valve. Packaged in 11 oz. to 16 oz. cans, depending on product.

Extends blade life

Tempos Epoxy Propeller Coating is formulated with the extra adhesion and abrasion resistance needed to protect propellers from corrosion and wear. Compared to standard enamel and lacquer paints, our epoxy formula stays on the blade more flying hours; hence, with regular use, this formula can extend blade life.


Several independent technical studies have suggested that excessive inhalation of zinc chromate dust may cause lung cancer. On the basis of these findings, the manufacturers have requested that the sale of zinc chromate primer and zinc chromate primer aerosol be restricted to commercial or professional shop use. Professional users should be certain that workers are not exposed to concentrations in excess of the O.S.H.A. threshold limit value (TLV) of 0.1 milligram (as chromium) per cubic meter. If conditions are such that this limit may be exceeded, additional protective equipment is required. A respirator that has a NIOSH/MESA approval TC-23C. See our catalog for respirators that meet this requirement.
California Prop 65 Warning Symbol

WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.


  • Frequently Purchased With
  • Customers Also Viewed


Strong coating.

Jarrvis Verified Purchase


August 31, 2021

Sprays on well but I did have trouble getting a consistent flat black look.

John V Verified Purchase


July 8, 2021

I use this to paint my spark plugs because I hate when they turn rusty. I used regular paint before and it just chipped off when using the spark plug socket. After using this paint and the spark plug socket this paint DOES NOT chip. I am now going to use this to paint my brake calipers.

Ronny B
June 10, 2021

HD product. Long lasting. Very good service at your company. Thanks for the quick shipping.

September 5, 2019

Best product Ive found that actually holds up. Downside is that you have to shake the can a lot to get everything to mix well and you cannot forget to clear the nozzle after use. IF you dont, it gums up fast and can render a near full can useless after one use. Paint cures fast too. Typically within 1/2 hr after application, aircraft is good to go.

James K
August 20, 2021

The Black worked as intended. Lambert Havelka

Lambert H
August 7, 2020

It works good if you keep shaking it while you spray it.. make two or three passes and shake the can two or three times

January 28, 2020

Excellent product ... when you can get it out of the can , great wear protection on rotor blades when applied the problem is the can , some cans spray very well others nozzle constant clogging and spluttery spray some cans go straight in the bin after any use and other used time after time till used up , wish it was available as normal paint and use a spray gun.

Mark H
October 7, 2022

Its hit and miss with these rattle cans. I found that it can take up to twenty minutes of shaking to get an almost even spray. I only use it for small touch up areas and nothing large. Also found out unlike most professional paints that no matter how careful the prep after four hours you can still peel the paint off the prop when applying a second color.

James W
December 31, 2020

I like this paint and have used it on many parts of my plane, nice spray width and consistent if you keep shaking. It takes a little more than expected so buy more than you think you will need. I have used 10 cans over the last 3 years and had no problems until the last can, test spray was good but half way through the first pass is started to sputter and get chunky, dripping out of the nozzle too, swapped to a nozzle from another can but was no help. Can was garbage. Plan to spray fair amount on the test piece for each can at the start so you dont have to strip the 3 coats you have on already to fix after a bad can.

Shawn T
June 9, 2020


Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the procedure to paint a fixed pitch prop? Remove the old paint with paint stripper? Primer required? Just spray on epoxy propeller coating?

Yes, That is exactly what you would do. Step 1: Remove the old paint with a paint stripper. Step 2: Primer is not necessary (optional) Step 3: Just spray on the Epoxy coating.

Q: Do you have a MSDS for this Tempo propeller epoxy?

Yes, we have added the MSDS to the Documents tab on this web page for download and review.

Q: What's the shelf life of this Tempo Epoxy Propeller Coatings product?

3 year shelf.

Q: Does this come in the Hartzell grey?

No, 09-00983 matches OE Hartzel Gray.

Q: Where and how can I purchase replacement nozzles? They clog easily

We currently do not stock spray nozzles for these cans.

Q: How to read the date code on the bottom of the propeller epoxy coating?

It is Day of year, last digit of year manufactured. For example: WJ2068JA = made 206th day of 2018, which would be 7/25/18
RM0569 = made 56th day of 2019, which would be 2/25/19

Q: What primer can I use under this paint? Thanks

Per our FAQ, primer is optional. We would recommend using the primer the propeller manufacturer recommends.

View in Catalog

View Image View in Catalog