|LED Complete System: Controller + 2 Red/Green/White Position and LED Strobe Heads||11-10687|
This wing tip, 100% LED, strobe and navigation light system features a cluster of very bright LEDs and using a common controller that furnishes the heads with a junction point for synchronizing and selecting one of the 7 flash patterns of the LED STROBES. It also allows for a separate power source to the navigation red, green and white LEDs.
The system includes 2 heads (one left & one right), mounting adapter plates for mounting on a radius, 50 feet of 3 conductor wire, plugs, pins, 1 controller, misc. wire connectors and mounting hardware.
This uncertified wing tip lighting system is ideal for my RV-4 experimental aircraft. I replaced a Whelen strobe/nav light system which used AeroFlash power supplies. I used the same 3 conductor wire required by the Whelen strobe lights for both strobe and nav lights. I had to fabricate aluminum adapter plates to mount the LED lights with the Whelen wingtip light compatible mounting screws. The lights work well out of the box. I didnt use the magnet to change the firing pattern.
KE LED WING TIP STROBE AND NAVIGATION
I could not believe, in this day and age where Amazon prime deliveries take weeks, that I received my order in three days.
Outstanding unit especially for ELSA application. Easy install and works well. Great substitute from incandescent strobes and position lights.
Strobe LEDs have failed 3 times, and repaired 3 times. This required personal shipping costs and aircraft downtime awaiting return. Now they’ve failed a 4th time. Not recommended. Awaiting a refund.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, they are not approved for certified aircraft.
These dimensions are listed in inches.
Yes, the 2 amp rating is for the entire system. This takes into account both the strobe and nav lights.
This lens is polycarbonate.
This unit requires 12/14 volt aircraft power to the power supply.
Per Kuntzleman, yes they are.
Per the vendor the LED version would have no radio interference.
Per the vendor, "Per FAR 23.1401 it exceeds the brightness requirement by over 100%"
Yes, we have added the installation manual to this web page for download and review.