THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE
Thumbs 1
Thumbs 1

SPIRAL WRAP 3/4" NATURAL FIRE RESISTANT PE-FR

$2.85/Foot
Part# 11-12334
MFR Model# 4FRP9C
Part No.Outside Dia.MaterialColorTemp Rate
11-123343/4"PE-FRNatural-4°F to +176°F

Overview

**Note: Less 10% discount for 100 FT. (per size)**

Permits flexible routing of cable harness while forming a neat, protective bundle. It twists on easily and quickly and allows lead-outs at any point. When installed, it may be gapped for greater economy and flexibility or it may be butted tightly for maximum abrasion resistance, insulation protection and greater rigidity. Nylon type-for use in wider temperature ranges with high resistance to abrasion and good solvent resistance.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Material Specifications

PE-FR:
  • Polyethylene (PE) + Flame Retardant (FR) = (PEFR)
  • Suitable for applications requiring a self-extinguishing material. Lower cost than polyamide 6 or teflon materials.

    PTFE:
  • Polytetrafluoroethylene -Teflon (PTFE)
  • Offers the widest operating temperature range of any material. It's chemically inert and non-flammable.

    PA6:
  • Polyamide 6 (PA6)
    Is recommended for use in enclosed enviroments where the possibility of fire exists. Self-extinguishing. Does not produce, any toxic or irritation, even when exposed to open flame or excessive temperatures. PA6 is six times as strong as polyethylene. Black polyamide 6 features the same properties as natural polyamide 6 with the added benefit of ab ultraviolet absorber so that it can be used in direct sunlight for long periods of time.
  • Reviews

    GREAT STUF

    Dennis L Verified Purchase

    SPIRAL WRAP 3/4" NATURAL FIRE RESISTANT PE-FR

    June 21, 2022

    I dont know how another customer could have made such a negative post regarding spiral wrap, especially if it was PFTE (Teflon), which I have found to be of excellent performance and withstands engine compartment heat year after year, with no degradation whatsoever

    William
    September 16, 2020

    Great service, fast shipping. I would definitely buy from Aircraft Spruce again and/recommend this company. Thanks!

    Eric
    July 7, 2020

    Spiral wrap tubing works great for bundling wires in the cockpit, along the floor and behind the panel. Makes for easy organization of wires. Highly recommended.

    Dan H
    June 11, 2020

    service was fast and will be ordering again, thanks

    Chris H
    May 1, 2020

    Product was as ordered. Seeing the size gave me insight as to what I needed to order next time.

    Percy
    June 7, 2019

    Low cost way to add safety reserve to your airplane. These eliminate chafing concerns and provide a removable way to neatly bundle wires without ty-wraps or lacing. They can also protect fuel and vacuum lines. I was able to install some one-handed without undue difficulty in a hard to access area.

    Jim F
    August 16, 2018

    Product is great, but the size chart shown is mis-leading. The max. diameter is not the diameter of the wire bundle, but something else.

    Paul
    August 20, 2015

    Started using it on panel upgrades instead of wires. Gives the final product a more professional look

    Adam
    August 25, 2019

    All of the Spiral Wrap Wire Protector Ive bought from Aircraft Spruce has proven to be useful and effective both (i) to bundle wires and (ii) to protect wires, cables and tubing (in particular, tubing that is part of our engine mount) from abrasion. HOWEVER, it is very difficult to order as the catalog (neither online or paper) DOES NOT STATE whether the provided dimension is the Inside Diameter or the Outside Diameter. In addition, while PE is defined as Polyethylene and NY is defined as Nylon, the stated materials are: PE-FR, PTFE, and PA6. While Im guessing FR means Fire Resistant and that PTFE is some form of Teflon, that is not stated in the catalog. And I have no idea what PA6 stands for. But for the above-described issues with the catalog, this product deserves a 5 star rating.

    John R
    April 7, 2021

    Q&A

    Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

    Q: Does this product comply with the FAA requirements concerning smoke and fumes generated by the product in the event of fire or over heat condition?

    Unfortunately no, this product is not FAA approved for an over heat condition.

    Q: How is the size measured on this item? I have some 1/2 inch I ordered. PN 11-12312 and it looks like 1/4 in inside diameter before using. What size should I order to get 1/2 before use? Thanks

    The 3/4", our p/n 11-12334, is approx. .550".

    Q: What is the temperature range for the white spiral wrap? Is it the same as the Black?

    Temp range is -4*F to +176*F. There are different ratings depending on specific part number you choose.

    Q: Which size outside diameter (example 1/8, 3/16,1/4 etc.) Would fit around an ignition harness spark plug wire ?

    You would want the 1/4 one.

    Q: Which OD fits a 5/16 inch ID? Thanks

    The 1/2 OD has an .37 id, that would probably be the best option.

    View in Catalog

    View Image View in Catalog