THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE

ATS RV BUILDERS STARTER KIT W/ 3X RIVET GUN

$964.00/Each
Part# 12-04850
MFR Model# RVS-2602A

Overview

This scaled down version of this RV Builder’s Kit contains just the tools you need to get your feet wet with sheet metal construction. The kit closely follows the recommended tools list from Van’s RV TRAINING PROJECT-1 and their TOOL BOX KIT projects. This kit is also the minimum recommended set of tools to build the empennage (tail) section of the RV3, RV4, RV7, RV8, RV9, and RV10 series of home built airplanes. Start out with this kit, and when you’re ready to do more advanced work, get the upgrade package to take you all the way up to the full RV Builder’s Tool Kit.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Specifications

  • 46 lbs (21Kg) shipping weight.

In The Box

  • 1 - 2x, 3x, 4x Or 2602a Rivet Gun
  • 1 - E-Z Retainer Spring
  • 1 - Swivel Air Regulator
  • 1 - Swivel Flush Set (1”)
  • 1 - Rivet Set (An470, 1/8”)
  • 1 - Bucking Bar (Mini)
  • 1 - Microstop Countersink
  • 1 - Pilot Cutter (3/32”)
  • 1 - Wiss Snip (Left & Str)
  • 1 - Wiss Snip (Right & Str)
  • 1 - Reversible Air Drill
  • 6 - Cobalt Drill Bits (#40)
  • 6 - Cobalt Drill Bits (#30)
  • 1 - Speed Deburring Tool
  • 1 - Cleco Pliers
  • 1 - Swivel Pop Riveter
  • 1 - Permanent Markers
  • 30 - Clecos (3/32)
  • 10 - Clecos (1/8)
  • 1 - 3m Cut & Polish Wheel 6”
  • 1 - 3m Riveter’s Tape
  • 1 - 12” Drill Bit #30
  • 1 - Dimple Die Set (3/32)
  • 2 - Squeezer Set Flush (1/2)
  • 1 - Back RiveT Set
  • 1 - Back Rivet Plate
  • 1 - Dimple Die Organizer
  • 1 - Aircraft Mech. Manual
  • 1 - Chip Chasers (4” & 8”)
  • 1 - Rivet Squeezer
  • 1 - C-Frame Riveting Tool
  • 1 - Dead Blow Hammer
  • 1 - Deburring Set

Reviews

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog