This gage consists of three independent gages contained within a standard 3" diameter case. Oil temperature and cylinder head temperature gages are moving coil meter move-ment operated by MS28034-1 and AN5546-1 resistance bulbs respectively. Connection for the temperature gage is by cannon type connector: P/N MS3106A-14S-2S. FAA TSO Approved C47. 18-1000-128 VDC Oil Temperature range from 50° to 250°F Oil Pressure range from 0 to 200 PSI Cylinder head temperature from 100° to 500°F 18-1000-2 28 VDC Oil Temperature range from 20° to 120°F Oil Pressure range from 0 to 200 PSI Cylinder head temperature from 50° to 250°F 18-1000-3 14 VDC Oil Temperature range from 50° to 250°F Oil Pressure range from 0 to 200 PSI Cylinder head temperature from 100° to 500°F 18-1000-4 14VDC Oil Temperature range from 20° to 120°F Oil Pressure range from 0 to 200 PSI Cylinder head temperature from 50° to 250°F Note: Please use Cannon Plug MS3106A-14S-2S (10-00790) for instruments and MS3106A-12S-3S (10-00958) for resistance buld. Made in the USA |
![]() |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The RC Allen engine gauge will fit into a 3 1/8" instrument hole. Measure the hole in your panel for exact measurements.
3-3/8 x 3-3/8 x 3-3/4
Yes, they can be used in certificated aircraft.
Yes. P/N 10-03435 can be used in certified aircraft. Please use Cannon Plug MS3106A-14S-2S (10-00790) for instruments and MS3106A-12S-3S (10-00958) for resistance buld.
Yes , RC Allen offers custom range markings and (23) combinations. This gauge is not internally lit, you will need to use a Nulite or similar lighting system.