All of Aircraft Spruces tubing is high quality stuff. I buy 4130 and aluminum tubing from these guys. Really a good place to buy this type of material.
March 17, 2022
I bought these to replace my Yakima round roof rack crossbars which were steel and would invariably after 5-6 years have rust poking up through the vinyl coating and end plugs splitting because of the rust. These aluminum tubes are a perfect fit for the roof attachment bracket and the end plugs. I bought the 6 ft., 1.125 OD with 0.125 wall thickness.
April 28, 2021
I purchased aluminum pipes for a handmade antenna used for ham radio. It perfectly works for all including cost advantage. Thank you.
April 5, 2021
exactly what I need fast service
March 29, 2021
February 18, 2021
Product was awesome!
January 27, 2021
Tubes arrived as promised.
January 20, 2021
Just what I ordered
January 5, 2021
Great price and has a local pickup. It worked perfectly for what I needed.
December 28, 2020
Just what I needed.
December 17, 2020
i have been ordering from this store for a number of years and have always received expert cooperation and assistance when needed from every worker there.
Merry Christmas and stay safe
December 14, 2020
Quality product. Extremely fast service and shipping. Highly recommend.
December 2, 2020
No issues as usual !
November 23, 2020
The only issue that I have is when I ordered this material (10 pieces) there was not enough stock in Atlanta so the 2 lengths had to come from California . So you held up the order only for a couple days in the mean time one of your people called me (she left me a message) to say that the order was being held up cause not enough stock. I called the next day to see what was going on, your company was going to hold the Georgia material till the California order arrived. This is a bit of inconvenience to me and annoying, I know in todays world everything cant be in one place to be shipped. But I think you should ship what you have wherever it is then make the customer aware whats shipping from where. The only other thing Im not happy with is the wait time on your phones. But overall your a good company and Ive sent other companies your way to buy material.
Thanks Ricky Capellaro
November 5, 2020
Perfect. And hard to find.
October 27, 2020
Excellent product and very friendly staff.
October 1, 2020
Perfect for my use. Received excellent service from Aircraft Spruce.
August 19, 2020
arrived as described!
August 5, 2020
Quality USA made and super fast shipping.
July 27, 2020
June 4, 2020
Very good products.
May 15, 2020
This is a great company to work with, super helpful with orders and fast shipping. My aluminum tube came fast and was packaged well this was exactly what I ordered. Thanks Aircraft Spruce & Specialty Co.
April 13, 2020
I received exactly what I ordered in just a couple of days. Product came free of any defects. I would recommend this company.
March 28, 2020
Excellent quality and fast service
December 29, 2019
Perfect, Just what I needed
December 26, 2019
As advertised ! Filled my requirements!, on time,
December 14, 2019
Yes good product
October 23, 2019
Great product and customer service!!!!
October 14, 2019
Built my first dragster in 1976 in Seal beach when I was in high school . Used to drive to the old store at the Fullerton airport , park right in front of the door ,walk in get the coolest stuff ! Been a customer ever since ! Best place to buy metal and hardware, period !!!
September 29, 2019
September 28, 2019
I spent 9 years ordering from you starting back in 1975 when I started my Skybolt project. I was happy with you then and very happy with you now.
August 17, 2019
Cut to correct size and shipped promptly.
August 8, 2019
Best prices in town for 1/2 x .035 ribs.
August 5, 2019
Best prices in town. I wish I could order 93 instead of 7 to get reasonable shipping prices. 8 would be even better, but not at freight prices.
July 6, 2019
Well packaged, perfectly straight, reasonably priced. Just what I needed!
May 26, 2019
Excellent rib material
February 7, 2019
Tubing is fine but 100.00 shipping is to much it cost more then the tubing.
January 12, 2019
Excellent product at an exceptional price, I was able to purchase a small quantity, and it shipped quickly. I will definitely be purchasing more!
January 1, 2019
Whats to review? Got what I ordered (T6 aluminum) shipping was reasonable. The usual good service from AS.
December 7, 2018
October 21, 2018
Was exactly what I wanted and ordered. Fabricated an improved crankcase vent and oil-air separator outlet tube - to extend into exhaust stream aft of an exh pipe. No more oil slime on belly
July 12, 2018
June 25, 2018
Excellent and reliable US material from Arizona at a good price and promptly delivered. Like it a lot Wes
May 26, 2018
Great Price, low cost fast shipping, good dealio, will use again and recommend to friends!!
May 21, 2018
good round tubing.
March 16, 2018
Great supplier. Quick shipping.
November 23, 2017
Thanks a bunch
November 9, 2017
great product, best prices around
November 9, 2017
The shipping costs are the lowest I have found.
The tracking number didnt work from the e-mail, so it was a surprise when it showed up at my door. My neighbor told me it was sitting outside unattended.
I like using the internet to order aluminum.
November 9, 2017
Best prices around
September 8, 2017
I purchased 1 ft piece of 6061T6 ALUM TUBE 1-5/8X.058 for an antenna repair. Quickly delivered. Very reasonable price and shipping. Excellent source for hobbiest looking for wide selection and no minimum orders.
July 22, 2017
Tubing was what I expected. It was great to see possibility to order exact length. Wide variety of shipping options allowed to keep costs low!
July 20, 2017
Pleased with ability to order on Sunday after weekend Build-a-Plane session and have material needed before the next session.
June 30, 2017
Great quality material- handles bends up to 180 deg using a 2 3/8 inside radius conduit bender
June 19, 2017
Excellent product with great prices and fast/cost effective shipping from ACS!!!
June 18, 2017
May 16, 2017
I am using the 3x .065 wall for alternate air for my aircraft and the quality is great. Tig welding was a breeze due to the .065. Fit up was great and was able to cut with a jigsaw and then grinder with sanding disk with a file for final fit. I got more just to have in stock.
March 19, 2017
I purchased two 6 lengths of aluminum
.500 dia x .035 wall thickness tubing. I was
Extremely pleased with the product. The shipping was fast and my biggest concern was for the tubes to be straight. I am using these
Tubes for masts on a model R.C. 1 Meter
Sailboat. They arrived perfectly straight with
Absolutely no damage. I will certainly recommend Aircraft Spruce to all the Boat Club
Members. Thanks for a great product.
March 2, 2017
it is the best
June 15, 2013
Would have given this a 5. The part was not de burred and had a few sharp edges. Not an issue for those of use that work with metals but maybe for the new hobbyist.
March 1, 2021
Would have given 5 stars, however, order was incomplete with several items back ordered. This is not a problem and we would recommend you to others as a supplier.
December 17, 2020
The shipping could be a little faster then this would be a 5
June 8, 2020
September 28, 2019
I received one and the other was back ordered. The other was a spare so it worked out just perfect for me. Thanks Spruce.
July 28, 2018
I asked for and thought I would get some protective covering for the Al tubes. I did not
March 25, 2021
This took a month to arrive
January 30, 2021
The product is perfect, but the cutting is quite rought
November 15, 2019
We have been buying this tubing for years. It has always been very consistent in ID and OD.
This order was different. The ID is normally .494-.495, but most of these are .490 or so. .005 is not a big deal, but we are reaming the ID to size, and normally take off less than .001.
Taking off .006 with a reamer is a mess, and there is a lot of swearing.
I compared the markings from the different IDs, and they are the same.
The tubing is excellent quality, and we will continue to buy it. Just hoping that this is an isolated run...
March 17, 2017