|Bushing #||Recommended for||# Req||Price
|A65, A75, C75, C85, C90, O-200-A, B||8||$4.40|
|O235 C1B & O290D||8||$25.90|
|O235, O320, O360||8||$11.95|
Engine Mount Bushings
22387: Teledyne Continental A65, A75, C75, C85, C90, O-200-A, B
60883: Lycoming O235 C1B & O290D, 7/8" dia mounting hole
71032: Lycoming O235, O320, O360 models, 1" dia mounting hole
*Always refer to manual for application
Mounts perfectly on my C-90. Just what it needed.
Excellent service and product. Thank you for having an Alaskan outpost.
Hopefully this set last longer the 35 hours in two months. First set split and cracked. Getting expensive to keep pulling engine every 2 months.
I have the same issue as one of your reviewers named Dustin, has. My rubber mounts on my J3 are less than a year old and are already hard as a rock, cracking and dry rotting! They are either very old stock or the polymer content is not the quality it should be! Nothing that critical to an airplanes operation should only last 10 months! Not pleased....
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
All the items on this web page are priced and sold each (1 bushing).
No, part number 22387 is manufactured by Superior. For the TCM version, see our part number 06-02037. Part number 06-02037 is manufactured by TCM.
Its diameter tapers from 1.25" down to .58", height is .96 and the hole ID is .37"
Bushing 60883- OD=1.61 tapering down to .81 HHeight= .88 Hole ID= .50
Bushing 71032- OD=1.63 tapering down to 1.00 Height= .92 Hole ID= .50
No this is made to be used with an AN6 bolt.