Add-on kits for single position system already installed. Consists of selector switch and 3 or 5 probes for CHT or EGT to provide analyzer for 4 or 6 cylinder engines. EGT kits furnished with long-life #712-2DWK probes. Note: EGT/CHT Gauges not included. For complete kits reference part numbers 10-17114, 10-17118, 10-17300. Made in USA |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Exactly what I was hoping for. Easy to install with clear instructions.
Westach 4 Position Switch With 8 Lead 254-4F Non-TSO
My existing probes were 40 years old and failing! These new probes have me up and running again.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
The probe was easily installed and worked properly. The only issue is that it historically does not last but a couple of years and has to be replaced.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
fit perfect with slight modifaction
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Product arrived as expected, tested ok.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Just as ordered
Westach 4 Position Switch With 8 Lead 254-4F Non-TSO
Called for part, works well
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
should work just fine
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
It is the switch plus 3 probes.
Hole size is .370". Switch plate diameter is 1.75". Switch body is 1.1" diameter. Threaded shaft is about 1/4" long