FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-4-SPRUCE
Thumbs 1
Thumbs 1

REAL GASKET RG-200PR-6 PUSHROD TUBE KIT - 1CYL (SET OF 6)

$665.00/Each
Part# 08-44444
MFR Model# RG-200PR-6

Overview

These kits from Real Gasket Corp replace problematic pushrod tubes of continental engine models: A-65, A-75, C-75/85/90/125/145, 0-200, 0-300 and GO-300. The installation does not require loosing or removal of the cylinder and converts it to an "independently serviceable" spring loaded pushrod tube system, similar to IO-470, IO-520, and IO-550 continental engines. It also allows access and service to the lifters.

Compressor Tool VSC-1 08-13615 is required except for gasket installation (not included in kit).

The kit is designed for easy installation and uses real gasket's FAA-PMA pushrod tube seals as used in the continental IO-470, IO-520 and IO-550 engines. For certified aircraft engines. This is a log entry, no special paperwork is required.

Kits include new push-rod tubes.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • Accessories
  • Frequently Purchased With
  • Customers Also Viewed

Reviews

David L Verified Purchase

REAL GASKET RG-200PR-6 PUSHROD TUBE KIT - 1CYL (SET OF 6)

March 27, 2024

As always - right parts, right price, fast shipping!

Daris H Verified Purchase

REAL GASKET RG-200PR-6 PUSHROD TUBE KIT - 1CYL (SET OF 6)

March 8, 2024

So far so good the installation required removal of the muffler system but went smoothly enough. It just takes time. So far not a drop of oil has leaked which is a refreshing change.

William G Verified Purchase

REAL GASKET RG-200PR-6 PUSHROD TUBE KIT - 1CYL (SET OF 6)

August 8, 2023

Very good, good quality STC

Brian R Verified Purchase

REAL GASKET RG-200PR-6 PUSHROD TUBE KIT - 1CYL (SET OF 6)

May 24, 2023

Do you make a kit for a 360 lycoming

Ralph M
June 4, 2022

Nicely made. If youve never done one of these conversions, find someone who has - to get the finer points of the installation. The instructions do not match the quality of the hardware.

Skiatook F Verified Purchase

REAL GASKET RG-200PR-6 PUSHROD TUBE KIT - 1CYL (SET OF 6)

February 6, 2022

Great kit. Installed over the past few days as I did a full re-seal on my C-90. With this kit and a host of new gaskets, I am finally leak free (for now).

Steven A
April 11, 2020

I have just installed these on 2 cylinders. Quick call to Chris at REAL Seals and he gave me some tips and tricks to make the installation go super smooth. ACS was quick to ship and they arrived in perfect condition!

Classic A
March 1, 2019

Kit to stop leaks, excellent instructions, price was very good also. This kit sure beats Continental kit price

Flying D
December 21, 2018

Ordered a complet set for my O-300-A. After disassembly of exhaust, intake manifold and rockers, removal of old tubes were cut with a saws-all. Old tubes came out with a little effort, but easily. READ THE INSTRUCTIONS CAREFULLY. I read them about 5 times before it really sank in. Once I got started, everything made sense. Do only one cylinder at a time. Kits are well made and complete. Must use their installation spring compressor. Consider it part of the cost of the job. All parts are FAA/PMA so only a log book entry required. Tubes work on all Continental engines A-65 through O-300 series (See AML). This is the answer to leaky OEM push rod tubes.

Jim F
January 22, 2018

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are these Real Pushrod Tube Conversion Kits for Continentals FAA Approved?

Yes, they are FAA Approved.

Q: The push rod tube kits are FAA approved, but do they require an STC?

The STC paperwork is included in the package with the pushrod tube conversion kits for continentals.

Q: Does this kit, part # 08-04444, include everything needed for 4 cylinders tubes, springs and seals?

Yes, this kit includes tubes, springs, and seals.

Q: Will these fit Superior Millennium cylinders?

This can be used on the millennium cylinders IF they are the old style swage tube type.

Q: Regarding 4 Cylinder Engines. Does one Kit cover all four cylinders or does it require four kits?

For a 4 cylinder engine, you should order 08-04444 x qty 1.

Q: It says no special paperwork required, but wouldnt this STCd kit require a 337 form to be completed and submitted?

The STC covers the install, no 337 would be required.

Q: What Spring compressor do I need? Please give me the number thank you.

Part # 08-17411 will work.