|2" x 25||09-05231|
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos.
Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The only difference is the color. The 08-11154 is black, and 08-11152 is off-white.
It is not adhesive. Per their instructions you would use clamps to attach it.
No, this material if for experimental aircraft only.
No, you do not need to use the Hi-Heat Coating with the wrap. The coating will help protect the wrap from dirt, oil, and debris and help keep the black color but it is not required.
Part # 08-11023 is 2" x 100 ft length.