EVERYTHING FOR AIRPLANES SINCE 1965 | 877-4-SPRUCE

Dynon Avionics Outside Air Temperature Probe

$82.00/Each
Quantity
Add to Wishlist
Part# 10-01823
MFR Model# 100433-001

Overview

This temperature probe, with 10 foot long cable, connects directly to the optional remote compass (only) to provide outside air temperature, true airspeed and density altitude.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Easy install. Cut the third wire per instructions for my particular installation. Programed Dynon, works perfectly.

Dr. A Verified Purchase

DYNON OAT PROBE D180 D100 D60 D10A D6

October 22, 2022

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Can I use the Dynon Avionics Outside Air Temperature probe with a AF5600 screen?

The Dynon Avionics outside Air Temperature probe is designed to work with D10A the D100. Using this probe with another manufacturer’s product is not tested and not recommended.

Q: Does this probe plug directly into my D100 or do I need other accessories?

The probe needs to contact to the EDC-D10A, which then will interface with the D100.

Q: Is part # 10-01823 actually Dynon p/n 100433-001?

Yes, part # 10-01823 is Dynon model no. 100433-001.

Q: Can this sensor be used as a Dynon SV-OAT-340?

Per the installation manual, it can be used, please refer to the manual to verify proper installation.

Q: Can this be daisy chained with a D10EMS *AND* a Skyview Touch? I use the D10EMS as a dedicated engine monitor and need the temp for % power.

No, each system will require it's own probe.

Q: Does this probe work with AV-30?

Per the manual, you must use probe part # 11-04603.

Q: What mounting equipment comes with this sensor? Also, is this item TSOd?

This sensor is for experimental applications and it does not come with any installation hardware.

Q: Is the wiring for this probe 2 or 3 wires?

This has 4 wires.

View in Catalog

View Image View in Catalog