1-877-4-SPRUCE | info@aircraftspruce.com
Aircraft Spruce & Specialty Co.
 
 
FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-4-SPRUCE
Home / Pilot Supplies / iPad, iPhone, Android / iPad Mini Mounts /X-NAUT ACTIVE COOLING CASE IPAD MINI 6
Main Image
Main Image
Main Image
Thumbs 1
Thumbs 1
Thumbs 1

X-NAUT ACTIVE COOLING CASE IPAD MINI 6

9 Reviews 8 Answered Questions
$196.75/Each
Quantity
Add to Wishlist View More In This Series →
Part# 13-24208
MFR Model# 0009-0348-4000

Overview

When you operate an airplane, you depend heavily on your new iPad Mini to get you to your destination. Unfortunately, if you have no way of keeping this device cool, you may end up losing your high-tech co-pilot when you need it the most. That’s why we at X-naut are proud to offer a top-of-the-line Cooling Case for the iPad Mini. This iPad case for pilots is designed to help you to work hard as well as play hard even in tough conditions.

WHY CHOOSE THIS COOLING CASE?

Our unparalleled Pilot Series Cooling Case for the iPad Mini 6 offers a number of benefits for today’s iPad-using plane operators. For instance, our cases can easily switch between utilizing AA battery power or Micro USB. If you use a battery, your case’s test button for the battery will tell you the battery’s status. As a result, you’ll know exactly when your battery needs replacing.

ADDITIONAL BENEFITS OF THE IPAD MINI CASE

Another reason to choose our iPad Mini case to cool your iPad? Our cases come with spring-loaded latches that make iPad Minis secure easily. In addition to this, our iPad cases for pilots come with fans that generate minimal noise so that you can stay focused on the important task of operating your plane. These cases are super resistant to moisture and dust, so you can be confident that they will withstand the harshest of conditions.

With our cooling cases, we also offer kneeboard mounts and other useful accessories that pilots can use to make their flight seamless and organized. If you have a RAM mount, note that our iPad case is compatible with it as well.

Shop now to buy our Cooling Case for the iPad Mini 6, right in time for your next flight, and get in touch if you need help finding the right product for your device!

FEATURES

  • Switch between using Micro USB or power by battery (4AA Mini Version).
  • Battery test button shows status of batteries. Green indicates high battery life, yellow indicates low battery life and red indicates battery replacement.
  • Spring loaded latch makes loading your iPad easy and secure.
  • Low noise fans (26 DBA)
  • Weight: 7 oz (no batteries no iPad™)
  • Dimensions: 8.3in x 5.6in x 1.7in
  • Compatible with RAM Mounts
  • Compatible with MGF© mounts when used with our MGF© Amp Adapter and MGF Puck Adapter (You must purchase both of these adapters for this to work with your MGF Mount.)
  • Kneeboard accessory mounts Active Cooling Mount to your leg.
  • Electronics are dust and moisture resistant.
*iPad™, AA batteries and micro USB cord are not included
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Videos

https://www.youtube.com/embed/g0VleiJdXgY

Reviews

Submit a Review

Francois T Verified Purchase

X-NAUT ACTIVE COOLING CASE IPAD MINI 6
January 2, 2024

Eric L Verified Purchase

X-NAUT ACTIVE COOLING CASE IPAD MINI 6
September 6, 2023

Anthony Verified Purchase

X-NAUT ACTIVE COOLING CASE IPAD MINI 6
May 29, 2023

Being in Florida the iPad mini has regularly shut down from overheat. Once the iPad was put into the X-Naut mount it has not failed even once. Battery operated or aircraft powered it has been perfect.

Henry K
July 31, 2022

Excellent product and excellent customer service both in the Corona, Ca location and online ordering!

Alex C
November 9, 2020

Good product and delivered when promised.

John H
September 20, 2020

I have been using the Xnaut for almost two years now. Cessna 182 in Arizona. Yes, in the summer its HOT from the surfact to 8,000 ft. in late spring and summer. I bought this when I was flying a Piper. Now I have airline style vents so I only turn on the Xnaut until I reach cruising altitude. On initial purchase I tested it at the house in direct sun with Foreflight runnning. The screen Temp. got to 133 but IPad did not shut down. No issues in the airplane at all. Highly recommend.

Albert J
July 5, 2020

Before buying the X-Nautical I looked at several sites over several months to read the reviews. Most of the reviews stated that their heat problem with their computer was solved. One review stood out and said the unit was flimsy and sent it back. When I did order the X-Naut. I did not know what to expect. When it arrived I was surprised at how well made it was. It was not flimsy The fans are very quiet outside of the aircraft. I cannot see how anyone in a small plane would hear the little fans. As far as using aircraft power I haven’t been able to use it yet. For me the batteries are fine. Ill rate the unit at 4 stars as I have not used it yet. Jim Fitzpatrick

Jim F
December 13, 2019

Be advised that if you want to mount this on a yoke mount you will not be able to use the aircraft power because the power connector is a mini USB connector which disconnects at the slightest movement of the yoke. You’ll have to use the batteries or highly modify the connection with zip ties, etc. They need to incorporate a lightning connector for the aircraft power instead of the outdated mini USB connector

Tom C
May 20, 2019

Q&A

Submit

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: This X-naut active cooling mount for iPad Mini says compatible with RAM mounts. Does it have the RAM ball on the back?

No, it has an amp pattern connection spot. This is where a RAM round base adapter, part # 11-07069, would screw into.

Q: I already bought the cooling mount and it works fine. Unfortunately my Ipad is no longer and I have to replace it. Will the new ipad mini 5 also fit in this cradle as it only mentions 1-4 ?

Yes, the iPad Mini 5 fits in this cradle.

Q: Is there a cooling mount for the regular sized iPad?

Yes, see Part# 13-19502 for the Air 1-2 and Pro 9.7. See Part# 13-21626 for the Pro 10.5. See Part# 13-22326 for the Pro 11.

Q: Can the iPad mini mount be placed directly on the panel? Is this a flush mount or will the mount stick out of the panel?

This is the device holder only. It is designed to work with RAM and MGF accessories. It is not specifically designed for panel installation.

Q: Will this work with an Otterbox case on the iPad?

No, this is designed to work with the iPad without a case or sleeve.

Q: Will this XNaut Cooling Mount work with the IPad Mini 6?

Yes we have added the model that works with the Mini 6 to this web page. It is our part # 13-24208.

Q: The description talks about the amp and puck adapters to be able to use the mgf leg mount Part# 13-23713. What are the part numbers need to be able to use the xnaut cooling case with the mgf leg mount? Or do RAM make a knee mount that is compatible with xnaut cooling case.?

See part # 13-19504 to use this as a kneeboard.

Q: How do you mount the X-Naut to the aircraft?

It is compatable with the RAM mount system so you can mount it several ways.

View in Catalog

View Image View in Catalog