FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-4-SPRUCE
Thumbs 1
Thumbs 1

AN386-2-14 TAPER PIN

$8.75/Piece
Part# AN386-2-14
MFR Model# 13023-1
Part Number
AN386-2-14

Overview

Manufactured from alloy steel, minimum tensile strength 125,000 PSI. Cadmium plated. Taper: 0.500"/ft. Use with AN975 taper pin washer, AN320 shear castle nut and cotter pin or with AN364 elastic stop nut. When installed, the small end of the tapered shank should protrude no more than 1/16" above the surface of the assembly. The first dash number is the Brown & Sharpe taper pin reamer number and the second dash number is the grip length in eighths of an inch. For undrilled threaded shank add the letter "A" after second dash number.

To order taper reamers, please click here.
   
California Prop 65 Warning Symbol

WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov

Reference Chart

Reference Chart

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Just what I ordered.

Richard
April 26, 2021

Aircraft Spruce has emailed me, asking me to write a review of this clevis pin I bought from them. But of course! The World needs a clevis pin review! I am very pleased to highly recommend to AS customers the Aircraft Spruce Clevis Pin! Note that the pin delivered to me was exactly the diameter that I had ordered and was also the very length that I had been hoping to receive. One end has a thin, flat head to keep it from passing completely through whatever it may be placed in. It is secured at its other end. My plans for this clevis pin included the idea of pinning it in place utilizing a properly curled cotter pin backed by a thin washer and, much to my pleasure, the clevis pin arrived with a hole already pre-drilled through its (non-head) end that was exactly the size I needed to accommodate the aforementioned cotter pin! As a cherry on top, the A.S. clevis pin was supplied with a very pleasing golden anodization, which is sure to inhibit rust for some time at the very least. My A.S. Clevis Pin (in conjunction with the above cotter pin and washer) now connects two important parts of my airplane together, in such a way that one is able to freely pivot relative to the other, and yet my parts are securely attached. I could not be more pleased. I whole-heartedly commend to you the Aircraft Spruce Clevis Pin, in the size of your needs, and I am certain that it will provide you with years of safe pivoting pleasure.

Keith D
April 19, 2021

These arrived in good shape and very quickly. I am very happy with Aircraft Spruce Service and prompt shippment!

William J
March 22, 2021

Just what I ordered. Lee

Lee W
February 10, 2021

Great item to add to keep to parts from working loose.

Dennis B
December 29, 2020

it is correct

Riad I
November 16, 2020

All of your team is extremely helpful and I receive a terrific service. Especially Suzzane and Monica :) which are I am in continuous contact with Thank you all Oren

Oren R
October 23, 2020

FAST SHIPPING. VERY HELPFULL. WOULD HIGHLEY RECOMEND THEM TO MY FRIENDS.

Chris M
October 19, 2020

One company wanted $42 with shipping. Another$19 when they could get it. Spruce was OTD shipped less than $7. Splendid! 2 day delivery! Thanks Spruce!

Harold R
September 4, 2020

Exactly what I needed at a very reasonable price. Fit my application as needed.

Don
August 13, 2020

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: I am ordering some clevis pins (AN394-21 and AN394-41). What is the size of the hole diameter for the cotter pin?

This measures out to .080" but has a +/- .010 tolerance.

Q: What is the CLEVIS PIN item # for turnbuckles AN150-32S?

You will need a AN394 clevis pin for a AN150-32S turnbuckle.

Q: What are the appropriate reamer sizes to use with Taper Pins 1, 2, 3, 4?

You would want to use the "BROWNE & SHARPE TAPER REAMERS" for AN386 taper pins. They are labeled as 1-10 for the applicable sized taper pin. The first number after the AN386-, is the Brown & Sharpe taper pin reamer size required.

Q: Which clevis do I need that is MS20392-2C63? Thanks

AN393-63 is the correct cross reference for MS20392-2C63.

Q: Plans call out AN393-11 pin, will 392 replace it?

If the plans are calling out for AN393-11, we recommend using the AN393-11.

Q: What is the right clevis pin for clevis AN665-21R?

AN396-21

View in Catalog

View Image View in Catalog