|Part No.||Type||Dia. x Length||Qty./Lb.|
|AN426AD-4-5||2117 Hard||1/8 x 5/16||1958|
Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13).
"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. Prices below are for 1lb. quantities. All rivets can be purchased in 1/4 lb. (use qty .25) and 1/8 lb. (use qty .13) packages. AN470 (MS20470) AN426 (MS20426).
AN426 are 100° rivets.
10% Discount for 5 lbs of rivets or more (per PN).
MS20426AD4-5 ALUMINUM RIVET
Perfect. Couldnt do it without A.S.
MS20426AD4-5 ALUMINUM RIVET
fast shipping was the standout quality for this order, Gotta love Aircraft Spruce and supply!!
I always feel bad when I put in an order thats got a lot of different items like this. I feel bad knowing someone has to 327 426AD 3-2, 651 426AD 3-2.5 rivets. But they still ship right away. Thankful to be able to order the small stuff by the 1/8 of a pound.
Just what I needed.
Great product- super fast delivery
Fast shipping and good items~~~~~~~~~~~~~!
These are great! They are just like the ones I had before I ran out. I would highly recommend these for your next project. Thanks Aircraft Spruce.
They are AN426 rivets! What do you mean by “view”?
Excellent! Easy to find on site, fast shipping, nicely packaged, good service
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the tech data sheet, the rivets have 100* countersink, and the hard "AD" rivets are made from 2117-T4 aluminum.
Several tools would be needed. A rivet gun with a flush rivet set, an air compressor, and a bucking bar to start. There are also rivet squeezers, and benchtop rivet fixtures. There are several tools and accessories to choose from.
AD rivets are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI.
This is +/- .010.
|The diameter is .275" and there are no markings on the head.
Approx 306 rivets per 1/4 lb of AN426AD-5-5.
These have a 100 degree countersink.