David Clark K10 Helmet Kit

Add to Wishlist
Part# 11-03840
MFR Model# 18852G-01


Series K10 Helmet Kit provides the ability to convert David Clark Company Over-the-Head style Headsets into a Helmet/Headset Assembly. This unique combination provides both impact and hearing protection, in addition to clear, crisp communication in high-noise environments. The K10 Helmet accommodates universal 3-Snap Visor/Face Shield Assemblies that are commercially available. Requires assembly. The Series K10 Helmet Kit cannot be used with H20-** Series headsets. Approx weight 1.5 lbs.

David Clark Company Series K10 Helmet Kits have three components: a suspension liner and an energy absorbing helmet shell with a protective nape pad.
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm -

In The Box

  • Nape Pad Part No. 18725G-01HA000
  • Suspension Liner Part No. 18677G-03
  • Helmet Shell Part No. 18847G-01
  • Frequently Purchased With
  • Customers Also Viewed


Originally got it for my ultralight setup but tested it in my Citabria training and it was quite comfortable. The DC headset fit well. Its a great setup for my needs.

Roger B Verified Purchase


October 4, 2023

By far the least expensive way into a quality head protection system.... Just add your DCs and a flip up visor!

Daniel F Verified Purchase


April 11, 2023

One of the snap on buttons came off the helmet upon first use. The maker/seller does not let you know if the helmet is fit to use with Bose or Light speed zulu headsets, when it would take them 5 minutes to determine. Bad.

Enrique S Verified Purchase


July 18, 2022

Great! no where near as bulky or cumbersome as i was fearing. fits well with easy and lightweight movement in the cockpit

Peter H Verified Purchase


July 31, 2021

Our 10 pilots of our Spraying Company use the David Clark Helmet, since the cabin of the Piper Pawnee is very narrow, is the only FAA aproved helmet thats fits.

Andres K
October 27, 2017

Comfortable fit. Needed to go on line for assembly instructions. Using helmet with the DC one-X.. The top two snap straps are too short to capture the metal band of the headset. After several tries I gave up and only use one. The perimeter snaps work well.

Greg B Verified Purchase


June 16, 2022

Form & fit excellent for my head and DC10-13.4 headset. Not crazy about the color.

May 24, 2020

I was given this so I have no investment but I figured I would give it a try. I was surprised how comfortable it was (once I got it adjusted), and how much quieter than with just the open headset. A little finicky to get together. I will continue using it. If I can get my lightspeed zulu into it, it will become regular kit.

May 12, 2020

I like these, however the instruction could be a little better.

April 30, 2020

A major PIA to install Dave Clark headsets in this helmet

John B Verified Purchase


July 13, 2023


Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does this K10 Helmet comes with a headset or is the helmet only?

This K10 "K" Helmet does NOT include a headset. It is the helmet only. Re: Part No. 11-03840

Q: What sizes do these David Clark K10 helmets come in?

These helmets are one size fits all. If an H10 headset fits your head, this will fit just fine.

Q: Can this helmet be painted with out affecting the integrity?

Per the supplier: Customer can paint it, but if affected while painting it will void the warranty.

Q: The snaps on front of the David Clark K 10 helmet - are they for a sun visor?

Yes they are for a sun visor but David Clark does not make or sell and option for us to offer.

Q: Would this helmet fit the DAVID CLARK H10-13Y YOUTH HEADSET? Is there any kind of adapter to fit the helmet to a smaller/child size head?

Per David Clark, the H10-13Y youth headset would be too small and would fit loosely with the K10 Helmet. There is no adapter available.

Q: Will the K10 accept Zulu lightspeed headset?

Because the K10 helmet (11-03840) is made by David Clark there is no cross reference data available. It is possible for other headsets to fit but we can not guarantee compatibility.

Q: Does the K10 K helmet meet any DOT, CSA or equivalent standards?

The David Clark K10 helmet (11-03840) has not been tested for a DOT equivalent rating.

Q: Does the David Clark K10 helmet come in multiple colors or just one?

Only white is available at this time.

Q: Will the David Clark DC one X fit in this David Clark K10 helmet?

Per the manufacturer, yes the David Clark DC One X will fit.

Q: What is the weight of the David Clark K10 helmet?

This helmet weighs approximately 1.5 lbs.

View in Catalog

View Image View in Catalog