|EZ Turn is a specialty lubricant/sealant used for fuel and oil line valves & is resistant to high temps. Especially effective where high octane fuels and aromatics are present. EZ Turn is also extremely efficient as a gasket paste & anti-seize agent. EZ Turn will not gum, crack or dry out. Each shipment is independently tested. Excellent for tapered plug valves, aircraft engine manufacturing, and marine applications. EZ Turn is the functional equivalent of fuel lube.|
Used on the A/Cs primer plunger, worked excellent.
I bought this to replace the one I have almost used up from a purchase 15 years ago.
I havent had a chance to use it myself, however I have heard nothing but great results from others that use it.
Without question the best sealant out there.
I bought this when replacing a Curtis fuel drain valve. The previous valve had Teflon tape on the threads and began leaking. I tried tightening it and eventually got it to seal but I tightned it so much the valve wouldnt open. I decided to replace the valve and use this Ez Turn Lubricant since it was rated for av-gas. It worked great! Got a nice seal and it looks much better than having Teflon tape on the threads. It makes me want to change the rest of the drain valves and use Ez Turn Lube.
a must have for any toolbox
Great product, packaging and shipping
Works great. Use instead of Teflon tape to seal threads in fuel and oil fittings.
I bought this lube to fix an oil gasket leak in my Porsche 912 engine & it worked perfect!
Yes, the EZ-Turn Lubricant can be used on threads for fuel applications.
The EZ-Turn is the same as the old Fuel-Lube, and can be used for o-rings in a fuel application.
Yes, per the tech data sheet, this meets:
Mil-G-6032D Am I Type I
730 days from date of manufacture.
Please review the document tab and review the technical data sheet to determine if this can be used for your application.
24 months from shipping date.
The shelf life is 24 months.