ASL CamGuard is a comprehensive additive package formulated to supplement specific functions in a wide variety of motor oils. It was designed to dramatically improve the performance of all mineral based , semi-synthetic and fully synthetic motor oils in the areas of corrosion protection, wear reduction, and seal protection.
Camguard is an advanced oil supplement designed to give regular engine oil what it needs to protect and lubricate any engine. Camguard is a synergistic blend of advanced oil additives from all over the world, designed to reduce wear, curb deposit formation and more importantly protect engines against rust and corrosion. It contains multiple corrosion inhibitors for both ferrous and non-ferrous metals. A combination of ashless anti-wear compounds, anti-oxidants designed to reduce carbon deposits and special seal conditioners to prevent oil weeping. Camguard is FAA accepted and approved for use in piston engine aircraft oils meeting SAE-1899 standards. Camguard is compatible with piston aircraft oils, passenger car motor oils, most marine oils, and heavy-duty diesel oils.
Works as advertised. My engine is at TBO and Im using this as some added protection, which has been corroborated by my mechanic who says its still a healthy engine.
The five stars are really for ACS and their customer service. As for the cam guard, I believe it has benefits but really have no proof. When I buy a case of Phillips 20w50 I open each bottle and add the 1.6 oz I think it is per qt? to every bottle and mark the bottles. Dont have to measure every time I add. Theres enough space in a full bottle to take the Cam Gaurd and leave some air space.
Order completed and delivered on time and perfect.
Bought an IO-390 equipped RV-7A several years ago which the previous owner didnt fly much. Iron was in the low 20s according to Blackstone and started using CamGuard after purchase. Iron dropped to 10-11 and is consistently in this range. Cant say enough about this product and its benefits for engines in high humidity environments and for those seeing irregular use.
Use this all the time. Never had an engine problem
Great product, recommended by many and it really does work. This is not snake oil. :-)
I always use 1 bottle at every oil change. Independent studies have concluded that the additive aids in protection and reduces corrosion.
I figured this stuff was snake oil at first, but tried some after a recommendation from someone I trusted. I cast a critical eye on my next oil analysis, and was very pleasantly surprised to find the wear metals to be greatly reduced. Cut in half, actually. So, I use it now!
Good stuff. Quick shipping
As always no problems. Thats why I purchase from Spruce.
Per the manufacturer, one pint of CamGuard will serve 8-10 quart sump for the change.
Per the supplier: The shelf life is indefinite.
Per the supplier: Yes. CamGuard is perfectly safe to use with 15W-50 oil.
The correct ratio is 1.6 oz of Camguard per quart. So for 12 quarts, you would need 19.2 oz.
It is recommended to add Camguard during each oil change. You would add 1.6 ounces of Camguard Aviation with each quart of makeup oil between oil changes.
Camguard is made NOT to be used during the break-in period of a new engine.
Yes, this can be used with 15W-50.
Yes, this is one of the preferred oils that Camguard recommends mixing this with.
Per Camguard: You would need to discuss this with the engine manufacturer or your A&P for this information.
Yes it is safe but it will not do any better with the camguard as the W100plus already has an additive IN it.