Spin-On Oil Filter CH48109-1 by Champion. Replaces oil filter element. Easy to install. Saves time and clean-up. FAA Approved.
Customers told Champion Aerospace the height of a standard oil filter can make it difficult for them to install the filter in certain engine applications. So, operating on the premise that size really does matter, they made their Champion oil filter can 1/2" shorter and, in the process, added design improvements that now make their filters stronger and more effective than ever before.
Champion Aerospace’s full-pleat, resin-impregnated micronic filter media traps all harmful particles, including metallic chips which result from abnormal engine wear. Because the oil flows through many layers of locked-in fibers, there is no migration of fiber material to clog engine oil passages or affect bearing surfaces. According to industry-approved tests, the Champion oil filter traps and holds more dirt and harmful particles during its normal operating time than any other similar filter.
Replacement elements service engine-mounted or line-installed filter systems incorporating a permanent housing assembly.
All sizes of replacement elements are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons
Modern spin-on oil filters contain the element, incorporating the anti-drain back valve mechanism (and internal bypass valve 48108-1/48109-1), and are sealed in a disposable housing.
All sizes of spin-on filters are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons.
Silicone impregnated filter gasket aids in future removal.
Shorter stud length on CH 48110-1 for tight clearance applications.
Heavy, corrugated steel center tube supports each convoluted pleat of the filter element and produces a substantially higher collapse-pressure rating, twice that of other similar filters.
Maximum full-flow design, without interference from center-bolt oil filter assemblies, provides increased oil filtration each engine-operating hour.
This product is satisfactory just like it always has been
February 22, 2021
How many nice things can you say about an oil filter. They are still in the box, they are pretty. The last one that I bought looks exactly like this one and it is on the airplane and works perfectly. Im happy. I hope Trump stays in office. Biden is a crook!
December 28, 2020
What I requested.
December 4, 2020
Great service, great product.
November 27, 2020
October 18, 2020
October 12, 2020
September 8, 2020
Itâ€™s an oil filter!
September 3, 2020
Products work as advertised.
September 2, 2020
Excellent performance and proven reliability with every oil change on my AEIO-320. The gold standard for general aviation oil filters.
June 29, 2020
Shipping was fast and the order was complete. Very satisfied with your service.
June 27, 2020
great Filters, fast service
April 24, 2020
Great filter. Used on an M-14 radial / Cj-6
March 12, 2020
February 16, 2020
Quality product, fair price,
December 28, 2019
Excellent oil filters.
November 10, 2019
getting parts from the Midwest Spruce is a full 5 star. the service is fast and and products are well packaged
September 8, 2019
Slight delay in delivery due to bad WX, not a problem I order well ahead. Thanks for quality product at a fair price
August 30, 2019
Can always count on Champion products and the exceptional service from Aircraft Spruce!!!
August 24, 2019
The Filter Works. But it was my experience in ordering with Aircraft Spruce that keeps me coming back. I do not order large quantities, but I get Quality service on what I order. Delivery is accurate and usually earlier than predicted.
May 20, 2019
Had the information I needed to select the filter and then shipped it to me with quick turnaround. Aircraft Spruce is my goto site for aircraft parts.
May 17, 2019
I count on Aircraftspruce and I count on Champion products.
February 14, 2019
I can always count on aircraft spruce to have what I need. Thank!
Q: My Beech S-35 with a 550 engine has a ch48109 on it. Will a ch48109-1 fit it?
Yes, the CH48109 and the CH48109-1 are interchangeable.
Q: Is the CH48109-1 just a slightly taller version and larger capacity than a CH48108-1? Basically wanting to know if they are interchangeable on a spinon application as long as clearance is available.
That is correct, all the dims and thread is the same but the 109 is just a little longer.